References
- Suder, K. L. and Celestina, K. L., 1994, 'Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor Rotor,' ASME paper 94-GT-365
- Hah, C. and Loellbach, J., 1999, 'Development of Hub Corner Stall and Its Influence on the Performance of Axial Compressor Blade Rows,' ASME J. Turbomachin., Vol. 121, No. 1, pp. 67-77 https://doi.org/10.1115/1.2841235
- Chima, R. V., 1998, 'Calculation of Tip Clearance Effects in a Transonic Compressor Rotor,' ASME J. Turbomachin., Vol. 120, No. 1, pp. 131-140 https://doi.org/10.1115/1.2841374
-
Arima, T., Sonoda, T., Shirotori, M., Tamura, A. and Kikuchi, K., 1999, 'A Numerical Investigation of Transonic Axial Compressor Rotor Flow Using a Low-Reynolds-Number
$k-{\varepsilon}$ Turbulence Model,' ASME J. Turbomachin., Vol. 121, No. 1, pp. 44-58 https://doi.org/10.1115/1.2841233 - Chung, J., Shim, J. and Lee, K. D., 2000, '3D Transonic Compressoe Design Optimization with Quasi-3D Flow Physics,' ASME FEDSM00-11075
- Denton, J. D. and Xu, L., 2002, 'The Effects of Lean and Sweep On Transonic Fan Performance,' ASME Turbo Expo, GT-2002-30327
- Cai, N., Xu, J. and Benaissa, A., 2003, 'Aerodynamic and Aeroacoustic Performance of a Skewed Rotor,' ASME Turbo Expo, GT-2003-38592
- Fischer, A., Riess, W. and Seume, J., 2003, 'Performance of Strongly Bowed Stators In a 4-Stage High Speed Compressor,' ASME Turbo Expo, GT-2003-38392
- Lee, S. Y. and Kim, K.-Y., 2000, 'Design Optimization of Axial Flow Compressor Blades with Three-Dimensional Navier-Stokes Solver,' KSME International Journal, Vol. 14, No. 9, pp. 1005-1012
- Ahn, C.-S. and Kim, K.-Y., 2003, 'Aerodynamic Design Optimization of A Compressor Rotor with Navier-Stokes Analysis,' Proceedings of the Institution of Mechanical Engineers, Part A-J. Power and Energy, Vol. 217, No. 2, pp. 179-184 https://doi.org/10.1243/09576500360611209
- Ko, W.-S., Kim, K.-Y. and Ko, S.-H., 2003, 'Aerodynamic Design Optimization of A Transonic Axial Compressor Rotor with Readjustment of A Design Point,' Proceedings of the KFMA Annual Meeting, pp. 639-645
- Kim, C.-T., Kim, J.-H. and Lee, D.-S., 1999, 'Performance Test of a Two Stage Axial Compressor of a Turboshaft Engine for Helicopter,' Proceedings of the KSAS Spring Conference, pp. 327-331
- Jameson, A., Pierce, N. A. and Maritnelli, L., 1997, 'Optimum Aerodynamic Design Using the Navier-Stokes Equations,' AIAA 97-0101
- Baldwin, B. S. and Lomax, H., 1978, 'Thin Layer Approximation and Algebraic Model for Separated Turbulent Flows,' AIAA 78-0257
- Guinta, A. A., 1997, 'Aircraft Multidisciplinary Design Optimization Using Design of Experimental Theory and Response Surface Modeling Methods,' Ph. D. Dissertant, Department of Aerospace Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA.
-
Box, M. J. and Draper, N. R., 1971, 'Fractional Designs, the
$|X^{T}X|$ Criterion, and Some Related Matters,' Technometrics, Vol. 13, No. 4. pp. 731-742 https://doi.org/10.2307/1266950