References
- Tsia, J. P. and Hwang, J. J., 1999, 'Measurements of Heat Transfer and Fluid Flow in a Rectangular Duct with Alternate Attached-Detached Rib-Arrays,' Int. J. Heat and Mass Transfer, Vol. 42, pp. 2071-2083 https://doi.org/10.1016/S0017-9310(98)00300-7
- Liou, T. -M., Chen, M. Y. and Wang, Y. -M., 2003, 'Heat Transfer, Fluid Flow, and Pressure Measurements Inside a Rotating Two-Pass Duct with Detached 90-Deg Ribs,' J. Heat Transfer, Vol. 125, pp. 565-574
- Ahn, J., Choi, H. C. and Lee, J. S., 2004, 'Large Eddy Simulation of Flow and Heat Transfer in a Channel with a Detached Rib Array,' Proceedings of The 3rd National Congress on Fluids Engineering, Paper No. UD01
- Hwang, J. -J. and Liou, T. -M., 1995, 'Effect of Permeable Ribs on Heat Transfer and Friction in a Rectangular Channel,' J. Turbomachinery, Vol. 117, pp. 265-271 https://doi.org/10.1115/1.2835655
- Hwang, J. -J. and Liou, T. -M., 1997, 'Heat Transfer Augmentation in a Rectangular Channel with Slit Rib-Turbulators on Two Opposite Walls,' J. Turbomachinery, Vol. 119, pp. 617-623 https://doi.org/10.1115/1.2841167
- Liou, T. -M., Chen, S. -H. and Shih, K. -C., 2002, 'Numerical Simulation of Turbulent Flow Field and Heat Transfer in a Two-Dimensional Channel with Periodic Slit Ribs,' Int. J. Heat and Mass Transfer, Vol. 45, pp. 4493-4505 https://doi.org/10.1016/S0017-9310(02)00157-6
- Chyu, M. K. and Natarajan, V., 1989, 'Local Heat Transfer on a Flat Surface Roughened with Broken Ribs,' ASME Winter Annual Meeting, HTD, pp. 25-31
- Hu, Z. and Shen, J., 1996, 'Heat Transfer Enhancement in a Converging Passage with Discrete ribs,' Int. J. of Heat Mass Transfer, Vol. 39, No. 8, pp. 1719-1727 https://doi.org/10.1016/0017-9310(95)00199-9
- Cho, H. H., Kim, Y. Y., Rhee, D. H., Lee, S. Y. and Choi, C., 2003, 'The Effects of Gap Position in Discrete Ribs on Local Heat/Mass Transfer in a Square Duct,' J. Enhanced Heat Transfer, Vol. 10, pp. 287-300 https://doi.org/10.1615/JEnhHeatTransf.v10.i3.40
- Tatsumi, K., Iwai, H. and Inaoka, K., 2002, 'Numerical Simulation for Heat and Fluid Characteristics of Square Duct with Discrete Rib Turbulators,' Int. J. Heat/Mass Transfer, Vol. 45, pp. 4353-4359 https://doi.org/10.1016/S0017-9310(02)00141-2
-
Kim, K. M., Kim, Y. Y., Rhee, D. H. and Cho, H. H., 2004, 'An Investigation of Duct Aspect Ratio Effects on Heat/Mass Transfer in a Rotating Duct with
$90^{\circ}$ Ribs,' ASME Paper No. GT2004-53533 - Goldstein, R. J. and Cho, H. H. 1995, 'A Review of Mass Transfer Measurements Using Naphthalene Sublimation,' Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434 https://doi.org/10.1016/0894-1777(94)00071-F
- Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainty in Single-Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
- McAdams, W. H., 1942, 'Heat Transmission, 2nd Edition,' McGraw-Hill, New York
Cited by
- Effect of the Configurations of Coolant Flow Passage on the Thermal-Flow Characteristics of Screw Compressor vol.17, pp.1, 2014, https://doi.org/10.5293/kfma.2014.17.1.041