한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제22권3호
  • /
  • Pages.162-169
  • /
  • 2005
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

족관절 근위부 골교정용 기능성 체외고정장치 개발

Development of a Functional External Fixator System for Bone Deformity near Joints in Legs

  • 이호중 (한국기술교육대학교 메카트로닉스공학부 대학원) ;
  • 전경진 (한국생산기술연구원 시스템엔지니어링팀)
  • 발행 : 2005.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The functional external fixator system fur bone deformity near joints in legs using the worm gear was developed for curing the difference angles in fracture bone and the lengthening bar for curing the difference length in fracture bone. Both experiments and FE analysis were performed to compare the elastic stiffness in several loading modes and to improve the functional external fixator system for the bone deformity. The FE model using the compressive and bending FE analysis was applied to the FE analysis due to the angle differences. The results show that the compressive stiffness value in experiment was 175.43N/mm; the bending stiffness value in experiment was 259.74N/mm; compressive stiffness value in FEM was 188.67N/mm; bending stiffness value in FEA was 285.71N/mm. The errors between experiments and FEA were less than 10%. The maximum stress (157MPa) to the angle of clamp was lower than the yield stress (176.4MPa) of SUS316L. The stiffnesses in both axial compressive and bending of the new fixator are about 2 times higher than other products except EBI (2003).

키워드

참고문헌

  1. Behrens, F., 'General theory and principles of external fixation,' Clin Orthop, Vol. 241, pp. 15-23, 1989
  2. Sisk, T. D., 'External fixation, historic review, advantage, complications, and indications,' Clin Orthop, Vol. 180, pp. 15-22, 1983
  3. Perren, S. M., 'Physical and biological aspects of fracture healing with special reference to internal fixation,' Clin Orthop, Vol. 138, pp. 175-196, 1979
  4. Oh, J. K., Park, J. H., 'Axial Stiffness of the Ilizarov Frame Using the Rancho Mounting Technique,' J Korean Orthop Assoc, Vol. 33, No.7, pp. 1928-1932, 1998
  5. Kempson, G. E. and Campbell, D .,'The comparative stiffness of external fixation frames,' Injury, Vol. 124, pp. 297-304, 1981 https://doi.org/10.1016/0020-1383(81)90205-9
  6. Kristiansen, T., Fleming, B., Reinecke, S. and Pope, M. H., 'Comparative study of fracture gap motion in external fixation,' Clinical Biomechanics, Vol. 2-4, pp. 191- 195, 1987 https://doi.org/10.1016/0268-0033(87)90080-5
  7. Paley, D., Flemming, B., Catagni, M., Kristiansen, T. and Pope, M., 'Mechanical evaluation of external fixators used limb lengthening,' Clin Orthop. Vol. 250, pp. 50-57, 1990
  8. Lee, M. K., Choi, K., Choi, I. H., 'The Effect of Mechanical Dynamization on Regenerative Bone Healing,' Proceedings of the Korean Society of Precision Engineering Conference, pp.158-161, 2002
  9. Kim, H. To, Lee, S. H., 'Clinical Application of Custom-mode External Fixator Dyna-Extor,' J Korean Orthop Assoc, Vol. 35, pp. 845-849,2000
  10. Koo, T. K. , Kim, Y. H., Choi, D. B., Jua, K. Go, Lim, J., Inoue, No, Chao, E. Y. So, 'Stiffness Analysis of Dynafix External Fixator System,' 2003 Summer Bioengineering Conference, pp. 1227-1228,2003