한국분말재료학회지 (Journal of Powder Materials)

  • 제12권4호
  • /
  • Pages.303-308
  • /
  • 2005
  • /
  • 2799-8525(pISSN)
  • /
  • 2799-8681(eISSN)
한국분말재료학회 (*구 분말야금학회) (The Korean Powder Metallurgy & Materials Institute)
권호 표지
DOI QR코드

DOI QR Code

Phase Change of Precipitates and Age Hardening in Rapidly Solidified Mg-Zn-Ca Base Alloys

  • 발행 : 2005.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Various kinds of Mg-Zn-Ca base alloys were rapidly quenched via melt spinning process. The meltspun ternary and quaternary alloy ribbons were heat-treated, and then the effects of additional elements on age hardening behavior and phase change of precipitates were investigated using Vickers hardness tester, XRD, and TEM equipped with EDS system. In ternary alloys, age hardening was mostly due to the distribution of $Mg_6Ca_2Zn_3$ and $Mg_2Ca$. The stable phases of precipitates were varied according to the aging temperature and the alloy composition. With the increase of Ca content, $Mg_2Ca$ precipitates were detected more than $Mg_6Ca_2Zn_3$ precipitates. In quaternary alloys, the precipitates taken from Mg-Zn-Ca-Co were identified as new quaternary phase, whereas those taken from Mg-Zn-Ca-Zr as MgZnCa containing Zr. In general, the ternary alloy showed higher peak hardness and thermal stability than the quaternary considering the total amounts of the solutes. It implies that the structure of precipitate should be controlled to have the coherent interface with the Mg matrix.

키워드

참고문헌

  1. Conference on Recent Advances in Science and Engineering of Light Metals, (Eds. K. Hirano, H. Oikawa and K. Ikeda), Tokyo, October, 115 (1991)
  2. Y. Khan: J. of Materials Science, 24 (1989) 963 https://doi.org/10.1007/BF01148785
  3. S. K. Das and L. A. Davis: Mater. Sci. and Eng., 98 (1988) 1 https://doi.org/10.1016/0025-5416(88)90116-4
  4. T. S. Srivatsan, Li We and C. F. Chang: J. of Materials Science, 30 (1995) 1832 https://doi.org/10.1007/BF00351618
  5. F. H. Froes et al.: Metal Powder Report, June (1988) 392
  6. T. Miyazaki, J. Karenko and M. Sugamoto: Mater. Sci. Eng. A, 181 (1994) 1410 https://doi.org/10.1016/0921-5093(94)90874-5
  7. W. W. Park, B.S. You, B. G. Moon, J. G. Park and S. C. Yang: Metals and Materials International, 7 (2001) 9 https://doi.org/10.1007/BF03026931
  8. L. Y. Wei, G. L. Dunlop and H. Westengen: Metal. Trans. A, 26 (1995) 1705 https://doi.org/10.1007/BF02670757
  9. Luo. M. O. Pekguleryuz: J. of Materials Science, 29 (1994) 5259 https://doi.org/10.1007/BF01171534
  10. G. Nussbaum, P. Saintfort, G. Regazzoni and H. Gjestland: Scripta Met, 23 (1989) 1079 https://doi.org/10.1016/0036-9748(89)90303-7
  11. P. Vostry, I. Stulikova and B. Smola: Mater. Sci. Eng., A137 (1991) 87 https://doi.org/10.1016/0921-5093(91)90321-D
  12. W. W. Park, B. S. You, P. M. Jardim, J. B. Vander Sande and I. G. Solorzano: Proceeding of the 2nd D. Israel International Conference of Magnesium Science & Technology, Israel, March, 2000, E.Aghion and D. Eliezer (Ed.), (2000) 198
  13. Standard JCPDS diffraction card, No 12-0266
  14. Standard JCPDS diffraction card, No 13-0450