DOI QR코드

DOI QR Code

ZnS 형광체 분말제조를 위한 기계적합금화법의 응용 연구

Application of Mechanical Alloying Method on the Fabrication of Zinc Sulfide Photo-luminescence Powders

  • Ahn In-Shup (Division of Advanced Materials Science and Engineering & ERI, Gyeongsang National University) ;
  • Chong Woo-Hyun (Division of Advanced Materials Science and Engineering & ERI, Gyeongsang National University) ;
  • Bae Sung-Yeal (Division of Advanced Materials Science and Engineering & ERI, Gyeongsang National University) ;
  • Sung Tek-Kyoung (Division of Advanced Materials Science and Engineering & ERI, Gyeongsang National University) ;
  • Park Dong-Kyu (Kaya AMA Inc. Yangsan)
  • 발행 : 2005.08.01

초록

In this study, the ZnS composite powders for host material in phosphor was synthesized in situ by mechanical alloying. As the mechanical alloying time increases, particle size of ZnS decreases. ZnS powders of $1.85\;\mu{m}$ in a mean size was fabricated by mechanical alloying for 10h. The crystal structures of ZnS powders were investigated by X-ray diffraction and the photo-luminescence properties was evaluated with the optical spectra analyzer. The steady state condition of mechanically alloyed ZnS was obtained as a mean particle size of $2\;\mu{m}$ in 5h milling. The sphalerite and wurtize structures coexist in the ZnS mechanically alloyed for 5h. The ZnS powder mechanically alloyed for 10h grows to the sphalerite structure. And the strong emission peaks of ZnS are observed at 480 nm wave length at the powders of mechanically alloyed for 10h, but the sphalerite and wurtize structures in ZnS coexist and emission peaks are not appeared at the powders of mechanically alloyed for 10h.

키워드

참고문헌

  1. C. C. Koch, O. B. Carvin, C. G. Mckamey and J. O. Scarbrough: Appl. Phys. Lett., 43 (1983) 1017 https://doi.org/10.1063/1.94213
  2. U. Mizutani and C. H. Lee: J. Mat. Sci., 25 (1990) 399 https://doi.org/10.1007/BF00714046
  3. L. Schultz: J. Less-Common Metals., 145 (1988) 233 https://doi.org/10.1016/0022-5088(88)90281-0
  4. R. Sundaresan and F, H. Froes: J. of Metals, 39 (1987) 22
  5. A. Calka: Appl. Phys. Lett., 59 (1991) 1568 https://doi.org/10.1063/1.106285
  6. I. S. Ahn, K. C. Jung and D. K. Park: J of Korean Powder Metallurgy Institue., 8 (2001) 253
  7. C. R. Ronda: J. Lumin., 72-74 (1977) 49-54 https://doi.org/10.1016/S0022-2313(96)00374-2
  8. K. Narita: J. Illum. Engng. Jpn., 69 (1985) 15-19
  9. W. Gassner, W. Rossner, and G. Tomande, Amsterdam, Elsevier. (1991) 951
  10. S. Shionya and P. Goldberg, Acadenic Press, 4 (1996) 206
  11. V. Dimitrova and J. Tate: Thin Solid Films., 365 (2000) 134 https://doi.org/10.1016/S0040-6090(99)01089-5