Implementation of 40kbps Narrowband Powerline Communication Modem using Chirp Spread Spectrum Method

Chirp 대역확산방식을 이용한 40kbps급 협대역 전력선 통신 모뎀 구현

  • Published : 2005.02.01

Abstract

Chirp spread spectrum method using both time and frequency component is fit to time varying channel such as powerline channel. The used chirp symbol based on the CEBus standard is the unit symbol which sweeps from 100kHz to 380kHz over a 25㎲. To evaluate the performance of between Chirp-SS and DSSS, we measured the bit error rate under Gaussian channel. Simulation result is shown that Chirp-SS has a about 3[dB] gain of SNR than DSSS. To verify the performance of implemented modem, it is made up the powerline channel environment. After adding several noises to it, we examined the receiving status of modem. The implemented modem is able to receive the signal over the powerline channel with having several noises and capacitive loads.

Keywords

References

  1. 최우혁, '홈네트워크 산업활성화 정책방향', Information Security Review, Vol. 2, pp. 87-94, 2004
  2. PLT-22 Powerline Transciver, http://www.echelon.com/Support/documentation/datashts/50090.pdf
  3. IT800 IC, http://www.yitran.com/it800ic.htm
  4. Dahlhaus, 'Chirp Modulation', Chapter in Wiley Encyclopedia of Telecommunications, J. Proakis (ed.), Vol. 1, pp. 440-448, 2003
  5. Grayson Evans, CEBus Demystified The ANSI/EIA 600 User's Guide, McGraw-Hill, 2001
  6. Klaus Dostert, Powerline Communications, Perntice Hall, 2001
  7. Gerd Bumiller, Markus, 'Complete Power line Narrow band System for Urban-wide communication', ISPLC 2001
  8. Andrew J. Viterbi CDMA Principles of Spread Spectrum Communication, Addison-Wesley, 1995