International Journal of Control, Automation, and Systems

  • 제3권1호
  • /
  • Pages.130-136
  • /
  • 2005
  • /
  • 1598-6446(pISSN)
  • /
  • 2005-4092(eISSN)
제어로봇시스템학회 (Institute of Control, Robotics and Systems)
권호 표지

One Idea on a Three Dimensional Measuring System Using Light Intensity Modulation

  • Fujimoto Ikumatsu (School of Mechanical and Control Engineering, Sun Moon University) ;
  • Cho In-Ho (Sun Moon University) ;
  • Pak Jeong-Hyeon (School of Mechanical and Control Engineering, Sun Moon University) ;
  • Pyoun Young-Sik (School of Mechanical and Control Engineering, Sun Moon University)
  • 발행 : 2005.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A new optical digitizing system for determining the position of a cursor in three dimensions(3D) and an experimental device for its measurement are presented. A semi-passive system using light intensity modulation, a technology that is well known in radar ranging, is employed in order to overcome precision limitations imposed by background light. This system consists of a charge-coupled device camera placed before a rotating mirror and a light-emitting diode whose intensity is modulated. Using a Fresnel pattern for light modulation, it is verified that a substantial improvement of the signal to noise ratio is realized for the background noise and that a resolution of less than a single pixel can be achieved. This opens the doorway to the realization of high precision 3D digitized measurement. We further propose that a 3D position measurement with a monocular optical system can be realized by a numerical experiment if a linear-period modulated waveform is adopted as the light-modulating one.

키워드

참고문헌

  1. I. Fujimoto, T. Hirose, M. Abe, N. Saito, and D. Takahashi, 'Two dimensional large scale laser digitizer system with a cordless cursor,' Institute of System, Control and Information Engineers, vol. 6, no. 11, pp. 479-487, 1993 https://doi.org/10.5687/iscie.6.479
  2. I. Fujimoto and M. Abe, 'Application of two dimensional laser digitizer to surveying,' Institute of System, Control and Information Engineers, vol. 7, no. 9, pp. 391-393, 1994 https://doi.org/10.5687/iscie.7.391
  3. H. Sakurai, T. Takada, and T. Sakata, 'Development of a new planar metrology system using laser,' Metrology, pp. 35-42, 1992
  4. J. R. Klauder, A. C. Price, S. Darlington, and W. J. Albersheim, 'The theory and design of chirp radar,' Bell System Technical Journal, vol. 39, no. 4, pp. 745-808, 1960 https://doi.org/10.1002/j.1538-7305.1960.tb03942.x
  5. M. I. Skolnik, Introduction to Radar Systems, McGraw-Hill Book Co., New York, 1980
  6. N. Kondo, Y. Ohashi, and A. Jitsumori, 'Signal processing in measurement sensors,' Shoko-do, 1987
  7. I. Fujimoto and S. Ando, '3D semi-passive digitizer using pulse-compression,' Proc. of National Conference of Institute of Electrical Engineers of Japan, March 26-28, vol. 3, pp. 49- 50, 1996
  8. I. Fujimoto, M. Mituhashi, and S. Ando, '3D semi-passive digitizing system using pulsecompression,' Technical Digest of 14Th Sensor Symposium in Japan, pp. 285-288, 1996
  9. R. A. Altes and D. P. Skinner, ''Sonar-velocity resolution with a linear period modulated pulses,' Journal of Acoustic Society of America, vol. 61, pp. 1019-1030, 1977 https://doi.org/10.1121/1.381375
  10. M. Mituhashi, H. Mochiduki, Y. Tamura, and H. Yamasaki, ''Velocity vector estimation of moving objects using sensor-array and linearperiod- modulated signal,' Society of Instrument and Control Engineers, vol. 23, no. 7, pp. 665-670, 1987 https://doi.org/10.9746/sicetr1965.23.665
  11. I. Fujimoto and S. Ando, 'A monocular 3Ddisplacement measurement of a light-spot cursor using a linear-period modulated signal,' Institute of Electronics, Information and Communication Engineers, C-1, vol. j81, no. 9, pp. 544-552, 1998
  12. I. Fujimoto, 'One idea on the reduction of systematic errors with interferometer,' Proc. of National Conference of Japan Society for Precision Engineering, pp. 89, 2000