Abstract
Computational studies on the hydrodynamic behavior of the forward-sweep inducers for the rocket-engine turbopump are presented in comparison with the conventional backward- sweep inducers. In the present study, two kinds of forward-sweep inducers are designed and numerically investigated. Forward-sweep inducers have bigger tip solidity compared to backward-sweep inducers even with shorter axial length due to their forward-sweep leading edge profiles. It is shown that back flows at the inlet decreases dramatically for forward- sweep inducers. And the low pressure region at the back flow are also decreased, which is assumed to promote the suction performance of the inducers. It seems that the hub located upstream of the tip at the leading edge induces pre whirl at the inlet blade tip for the backward sweep inducer. And this pre whirl leads to the big back flow.
액체로켓용 터보펌프 인듀서의 성능향상을 위해서 전진익형 인듀서를 설계하고 유동해석하였다. 전진익형 인듀서의 경우 형상의 특징상 후진익형 인듀서에 비해서 짧은 축길이에도 상대적으로 큰 익단 현절비를 가지고 있으며, 큰 현절비에서도 불구하고 수력효율의 저하가 없었다. 또한 전진익형 인듀서의 경우 일반적인 후진익형 인듀서에 비해서 인듀서 입구에서 발생하는 역류의 크기가 작고, 또한 인듀서 블레이드 팁에서의 국부적인 저압영역이 작은 영역에서 발생하는 것이 관찰되었다. 따라서 전진익형 인듀서의 경우 인듀서 입구의 정압이 높아서 흡입성능의 향상이 있을 것으로 판단되었다. 후진익형 인듀서의 경우 허브의 블레이드가 입구 유동을 교란하여 입구 역류가 커지지만, 후진익형 인듀서의 경우 이러한 교란효과가 없기 때문에 역류가 줄어든 것으로 나타났다.