廢自動車 ASR의 風力 및 比中選別에 의한 處理 硏究

Treatment of ASR from End-of-Life Vehicles by Air and Gravimetric Separation

  • 이화영 (韓國科學技術硏究院 金屬工程硏究센터) ;
  • 오종기 (韓國科學技術硏究院 金屬工程硏究센터)
  • Lee, Hwa-Young (Metals Processing Research Center, Korea Institute of Science & Technology) ;
  • Oh, Jong-Kee (Metals Processing Research Center, Korea Institute of Science & Technology)
  • 발행 : 2005.04.01

초록

폐자동차 ASR으로부터 염소성분을 제거하기 위하여 풍력선별 및 비중선별 실험을 수행하였다. 또한, ASR플라스틱만을 분리하여 물을 매체로 한 비중선별을 실시하였다. ASR 시료는 모두 8 mm이하로 재분쇄하여 선별실험에 사용하였으며, 플라스틱은 3가지 입도로 나누어 비중선별 실험을 하였다. 풍력선별은 공기유량 9~20 M$^3$/hr 범위의 1단계와 공기유량 25~34 M$^3$/hr 범위의 2단계로 나누어 실시하고 각 산물의 비율과 재질분포를 조사하였다. 1단계 풍력선별후 underflow 산물의 비율은 62~66%인 것으로 나타났으며, 공기유량이 큰 2단계 풍력선별에서는 overflow 산물의 비율이 크게 증가하였다. 폐플라스틱만을 대상으로 한 비중선별 실험결과 부유물질이 침강물질에 비해 다소 많게 나타났으며, 염소함량에 있어서는 최대 수백개의 염소함량 차이를 보여 순수 플라스틱의 경우 매우 우수한 염소함유 재질의 분리효과를 얻을 수 있었다.

A study on the air and gravity separation has been performed for the removal of chlorine containing materials from ASR of end-of-life vehicles. The gravity separation was also conducted on waste plastics collected from ASR. In this work, ASR were previously shredded to pass through 8 mm sieve prior to separation tests and the gravity separation of waste plastics was conducted for three different particle sizes. The two-stage air classification was conducted with the range of air flow rate of 9~20 M$^3$/hr at first stage and 25~34 M$^3$/hr at second stage, respectively. The fraction of overflow product was remarkably increased in the 2nd stage air classification because of high air flow rate while that of underflow product obtained from 1st stage air classification was found to be 62~66%. From the results of gravity separation on waste plastics, it was also found that the amount of the float product was much greater than sink product. It is believed that the gravity separation may be used very efficiently for the removal of calorine bearing materials from waste plastics.

키워드

참고문헌

  1. 이화영,오종기, 김성규,2002: 폐자동차 파쇄를 통한 주요구성물질의 분리 및 분석평가,자원리싸이클링,11(4),pp. 11-16
  2. 이화영,오종기,김성규,2003: 폐자동차 파쇄 잔류물을 이용한 고체연료의 제조연구,자원리싸이콜링,12(4),pp. 58-64
  3. 오종기,이화영,김성규,2001: 폐자동차 차피파쇄잔류물의 조성에 대한 분석평가연구, 자원리싸이클링, 10(4), pp. 34-41
  4. Numajiri, I., 2000: Current situation and tasks of disposal of end-of-life vehicles, 資源 と 素村, 116, pp. 879-888
  5. Borgianni, C., De Filippis, P., Pochetti, F., and Paolucci, M., 2002: Gasification process of waste containing PVC, Fuel, 81, pp. 1827-1833 https://doi.org/10.1016/S0016-2361(02)00097-2
  6. Jody, B. J. et al., 1990: Recycling of plastics in automobile shredder residue, U. S. DOE Report, DE90-011110, pp. 1-5
  7. Hubble, W. S., Most, I. G., and Wolman, M. R., 1987: Investigation of the energy value of automobile shredder residue, U. S. DOE Report, DE87-013645, pp. 7-14
  8. 스웨덴 자동차 제조 및 판매협회, 1998: 폐차에 대한 생산자의 의무, 스웨덴 환경보호국 보고서, 스웨덴
  9. Shapiro, M. and Galperin, V., 2005: Air classification of solid particles: a review, Chemical Engineering and Processing, 44, pp. 279-285 https://doi.org/10.1016/j.cep.2004.02.022
  10. Hashmi, K. A., Harnza, H. A., and Wilson, J. C., 2004: CANMET hydrocyclone: an emerging alternative for the treatment of oily waste streams, Minerals Engineering, 17, pp. 643-649 https://doi.org/10.1016/j.mineng.2004.01.019
  11. Basaran, T. K., Demetriades, K., and McClements, D. J., 1998: Ultrasonic imaging of gravitational separation in emulsions, Colloids and Surface A: Physicochemical and Engineering Aspects, 136, pp. 169-181 https://doi.org/10.1016/S0927-7757(97)00338-5