한국전기전자재료학회논문지 (Journal of the Korean Institute of Electrical and Electronic Material Engineers)

  • 제18권1호
  • /
  • Pages.38-42
  • /
  • 2005
  • /
  • 1226-7945(pISSN)
  • /
  • 2288-3258(eISSN)
한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지
DOI QR코드

DOI QR Code

B2O3와 CuO가 첨가된 Ba(Mg1/3Nb2/3)O3 세라믹스의 저온소결과 마이크로파 유전특성 연구

Low-temperature Sintering and Microwave Dielectric Properties of the B2O3 and CuO-added Ba(Mg1/3Nb2/3)O3 Ceramics

  • 임종봉 (고려대학교 재료공학과) ;
  • 손진옥 (고려대학교 재료공학과) ;
  • 남산 (고려대학교 재료공학과) ;
  • 유명재 (전자부품연구원 고주파재료연구센터) ;
  • 이우성 (전자부품연구원 고주파재료연구센터) ;
  • 강남기 (전자부품연구원 고주파재료연구센터) ;
  • 이확주 (한국표준과학연구원 물질량표준부)
  • 발행 : 2005.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

B$_2$O$_3$ added Ba(Mg$_{1}$3/Nb$_{2}$3/)O$_3$ (BBMN) ceramics were not sintered below 900 $^{\circ}C$. However, when CuO was added to the BBMN ceramic, it was sintered even at 850 $^{\circ}C$. The amount of the $Ba_2$B$_2$O$_{5}$ second phase decreased with the addition of CuO. Therefore, the CuO additive is considered to react with the B$_2$O$_3$ inhibiting the reaction between B$_2$O$_3$ and BaO. Moreover, it is suggested that the solid solution of CuO and B$_2$O$_3$ might be responsible for the decrease of the sintering temperature of the specimens. A dense microstructure without pores was developed with the addition of a small amount of CuO. However, a porous microstructure with large pores was formed when a large amount of CuO was added. The bulk density, the dielectric constant ($\varepsilon$$_{r}$) and the Q-value increased with the addition of CuO but they decreased when a large amount of CuO was added. The variations of those properties are closely related to the variation of the microstructure. The excellent microwave dielectric properties of Qxf = 21500 GHz, $\varepsilon$$_{r}$ = 31 and temperature coefficient of resonance frequency($\tau$$_{f}$) = 21.3 ppm/$^{\circ}C$ were obtained for the Ba(Mg$_{1}$3/Nb$_{2}$3/)O$_3$+2.0 mol%B$_2$O$_3$+10.0 mol%CuO ceramic sintered at 875 $^{\circ}C$ for 2 h.h.2 h.h.

키워드

참고문헌

  1. T. Okawa: Sumitomo Search, Vol. 47, No, 1, p. 117, 1991
  2. T, Takada, S. F. Wang, S. Yoshikawa, S. J. Jang, and R. E. Newham, 'Effects of glass additions on $(Zr,Sn)TiO_4$ for microwave applications', J. Am. Ceram. Soc., Vol. 77, No.9, p. 2485, 1994
  3. S. Nomura and K. Kaneta, '$Ba(Mg_{1/3}Ta_{2/3})O_3$ ceramics with temperature-stable high dielectric constant and low microwave loss', Jpn. J. Appl. Phys., Vol. 21, No. 10, p. L624, 1982
  4. S. Kawashima, M. Nishida, I. Ueda, and H. Ouchi, 'Proc 1st meeting ferroelectric materials & their applications, Kyoto, 1977 (Keihin Printing Co., Ltd., Tokyo)', Proc. Ferro. Mater. Appl., Vol. 1, No. 2, p. 293, 1977
  5. S. B. Desu and H. M. O'Bryan, 'Microwave loss quality of $Ba(Zn_{1/3}Ta_{2/3})O_3$', J. Am. Ceram. Soc., Vol. 68, No. 4, p. 546, 1985
  6. S. Nomura, 'Ceramics for microwave dielectric resonator', Ferroelectrics, Vol. 49, No.1, p. 61, 1983
  7. J. B. Lim, J. O. Son, S. Nahm, W. S. Lee, M. J. Yoo, N. K. Kang, H. J. Lee, and Y. S. Kim, 'Low-temperature sintering of $B_2O_3$-added $Ba(Mg_{1/3}Nb_{2/3})O_3$ ceramics', Jpn. J. Appl. Phys., Vol. 43, No. 8A, p. 5388, 2004
  8. B. W. Hakki and P. D. Coleman, 'A dielectric resonator method of measuring inductive capacities in the millimeter range', IEEE Trans. Microwave Theory Tech., Vol. 8, No. 3, p. 402, 1960
  9. W. E. Courtney, 'Analysis and evaluation of method of measuring the samples permittivity of microwave insulators', IEEE Trans. Microwave Theory Tech., Vol. 18, No. 3, p. 476, 1970
  10. N. S. Shuster, Kh. L. K. Zelnalova, and M. I. Zargarova Russ. J. Inog. Chem., Vol. 35, No. 1, p. 151, 1990

피인용 문헌

  1. Microwave Dielectric Properties of the LiNb3O8-TiO2Ceramic System with the Addition of Low Firing Agents vol.21, pp.6, 2008, https://doi.org/10.4313/JKEM.2008.21.6.517