Injection Molding Technology for Micro/Nano pattern

미세패턴 사출성형 기술

  • 유영은 (한국기계연구원 지능형정밀기계연구부) ;
  • 서영호 (한국기계연구원 지능형정밀기계연구부) ;
  • 제태진 (한국기계연구원 지능형정밀기계연구부) ;
  • 최두선 (한국기계연구원 지능형정밀기계연구부)
  • Published : 2005.02.01

Abstract

Keywords

References

  1. H.,Schift, C., David, M.,Gabriel, J., Gobrecht, L.J., Heyderman, W., Kaiser, S., Koppel and L., Scandella, 'Nanoreplication in polymers using hot embossing and injection molding,' Microelectronic Engineering, Vol. 53, pp. 171-174, 2000 https://doi.org/10.1016/S0167-9317(00)00289-6
  2. Yu, Liyong, Koh, Chee Guan, Lee, L. James and Koelling Kurt W., 'Experimental Investigation and Numerical Simulation of Injection Molding with Micro-Features,' Polymer Engineering and Science, Vol. 42, pp. 871-888, 2002 https://doi.org/10.1002/pen.10998
  3. Yu, Liyong, Lee, L. James and Koelling Kurt W, 'Flow and Heat Transfer Simulation of Thin-Wall Injeciton Molding with Microstructures,' SPE ANTEC 2003, pp. 602-606, 2003
  4. Kari, Monkkonen, Joni, Hietala, Pertti, Paakkonen, Esko, J. Paakkonen, Terho, Kaikuranta, Tuula T. Pakkanen and Timo, Jaaskelainen , 'Replication of sub-Micron Features Using Amorphous Thermoplastics,' Polymer Engineering and Science, Vol. 42, pp. 1600-1608, 2002 https://doi.org/10.1002/pen.11055
  5. Yoo, Yeong-Eun, Park, Sihwan, Moon, Jong Shin and Lee, Shi-Ho,' Influence of the shear heating on measuring the viscosity of the polymer melt using slit die rheometer,' 2002 KSME Fall Conference, 2002
  6. Yoo, Yeong-Eun, Park, Sihwan and Lee, Shi-Ho, 'Improving the aesthetics and the mechanical properties of injection molded parts using a mold with high temperature,' SPE Automotive TPO Global Conference 2002
  7. Yao, D. and Kim B, 'Rapid Thermal Response Molding for Cycle Time Reduction,' SPE ANTEC 2003, pp. 607-611, 2003
  8. Iwame, Hiroyuki, Fukuoka, Masayoshi, Ohno, Yuzo, Kanayama, Hiroyuki, 'An Advanced Cavity/Core System Mold for Ultra-Low Pressure Injection Molding-'ULPAC MOLD',', SPE ANTEC 2003, pp. 468-472, 2003
  9. Kim, Dong-hak, Kang, Myung-ho, Chun, Y.H, 'Development of a New Injection Molding Techonology : Momentary Mold Surface Heating Process,' Journal of Injection Molding Technology, Dec, 2001