참고문헌
- Shalaby, M.A. and Younan, M.Y.A., 'Limit loads for pipe elbows subjected to in-plane opening moments and internal pressure', J. of Press. Ves. Tech., Vol. 121, pp. 17-23, 1999 https://doi.org/10.1115/1.2883661
- Chattopadhyay, J., 'The effect of internal pressure on in-plane collapse moment of elbow', Nucl.Eng. & Des., Vol. 212, pp. 133-144, 2002 https://doi.org/10.1016/S0029-5493(01)00468-X
-
Matzen, V. and Yu, L., '
$B_2$ stress index for elbow analysis', Nucl. Eng. & Des., Vol. 192, pp. 261- 270, 1999 https://doi.org/10.1016/S0029-5493(99)00112-0 - Shalaby, M.A. and Younan, M.Y.A., 'Nonlinear analysis and plastic deformation of pipe elbows subjected to in-plane bending', Int. J. Pres. Ves. & Piping, Vol. 75, pp. 603-611, 1998 https://doi.org/10.1016/S0308-0161(98)00059-3
- Tan, Y. and Matzen, V., 'Correlation of in-plane bending test and FEA results for thin-walled elbows', Nucl. Eng. & Des., Vol. 217, pp. 21- 39, 2002 https://doi.org/10.1016/S0029-5493(02)00137-1
- Kussmaul, K., Diem, H.K., Uhlmann, D, and Kobes, E., 'Pipe bend behavior at load levels beyond degisn', Trans. of SMiRT-13, pp. 187-198, 1995
- Hilenkopf, P., Boneh, B., and Sollogoub, P., 'Experimental study of behavior and functional capability of ferritic steel elbows and austenitic stainless steel thin-walled elbpws', Int. J. Pres. Ves. & Piping, Vol. 33, pp. 111-128, 1988 https://doi.org/10.1016/0308-0161(88)90065-8
- Kim, J.W., Kim, T.S., Park, C.Y., 'An evaluation of the effect of local wall thinning defect on the collapse moment of elbow', Trans. of KSME (A), Vol. 28, No. 4, pp. 402-409, 2004
- Chattopadhyay, J., Butta, B.K., Kushwaha, H.S., Roos, E., and Herter, K. H., 'Load bearing capacity of flawed piping components-comparison of experiment with calculation', Int. J. Pres. Ves. & Piping, Vol. 81, pp. 599-608, 2004 https://doi.org/10.1016/j.ijpvp.2004.04.007
- American Society of Mechanical Engineer, ASME B&PV Code Sec.III, 1995 ed., 'uclear Components'
- American Society of Mechanical Engineer, ANSI/ASME B31.1, 1995ed., 'Power Piping Code'
-
Kumar, R. and Saleem, M.A., 'Bend angle effect on
$B_2$ and$C_2$ stress indices for piping elbows', J. of Press. Ves. Tech., Vol. 123, pp. 226-231, 2001 https://doi.org/10.1115/1.1357536 - Korea Atomic Energy Research Institute, 'Development of enhanced safety technology for operating PHWR plant', KAERI/RR-2226/2001, Final Report, 2001
- Hibbitt, Karlson and Sorensen Inc., 'BAQUS ver. 6.2 User's Manual', 2002