한국재료학회지 (Korean Journal of Materials Research)

  • 제15권12호
  • /
  • Pages.765-772
  • /
  • 2005
  • /
  • 1225-0562(pISSN)
  • /
  • 2287-7258(eISSN)
한국재료학회 (Materials Research Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

PAS법을 이용한 Ni기 비정질 분말의 소결

Sintering of Ni-Based Amorphous Alloy Powders by Plasma Activated Sintering Process

  • 구자민 (창원대 나노 신소재공학부) ;
  • 신기삼 (창원대 나노 신소재공학부) ;
  • 김윤배 (한국과학기술연구원 자성재료 그룹) ;
  • 배종수 (한국기계연구원 분말재료그룹) ;
  • 허성강 (창원대 나노 신소재공학부)
  • Koo, Ja-Min (School of Nano-and Advanced Materials, Changwon National University) ;
  • Shin, Kee-Sam (School of Nano-and Advanced Materials, Changwon National University) ;
  • Kim, Yoon-Bae (Magnetic Materials, Group, KIST) ;
  • Bae, Jong-Soo (Powder Metallurgy Group, KIMM) ;
  • Hur, Sung-Kang (School of Nano-and Advanced Materials, Changwon National University)
  • 발행 : 2005.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PAS(Plasma Activated Sintering) process was tried to apply for the fabrication of BMG(Bulk Metallic Glasses) of $Ni_{57}Zr_{20}Ti_{18}Si_5}\;and\;Ni_{57}Zr_{20}Ti_{18}Si_3Sn_2$ from the as-atomized amorphous powder. Compressive strength for the BMG(bulk Metallic Glasses) of $Ni_{57}Zr_{20}Ti_{18}Si_5$ were lower than those of BMG rods produced by warm extrusion ,or copper mold casting method. Microstructural examination by optical microcope, SEM ana EDS showed that oxidation had occurred during PASintering. In order to prevent the powder from the oxidation during PASintering, Ni coating for $Ni_{57}Zr_{20}Ti_{18}Si_5$ amorphous powder by electroless-plating method was performed. Microstructural examination for Ni coated layers after PASintering indicated that the Ni coating had been so effective to prevent powder from oxidation during PASintering. Sintering behaviors of $Ni_{57}Zr_{20}Ti_{18}Si_3Sn_2$ represent the same as those of $Ni_{57}Zr_{20}Ti_{18}Si_5$.

키워드

참고문헌

  1. S. Yi, J. K. Lee, W. T. Kim and D. H. Kim, Journal of Non-crystalline Solids, 291(1-2), 132 (2001) https://doi.org/10.1016/S0022-3093(01)00801-8
  2. D. H. Bae, M. H. Lee, S. Yi, D. H. Kim and D. J. Sordelet, Journal of Non-crystalline Solids, 337(1), 15 (2004) https://doi.org/10.1016/j.jnoncrysol.2004.03.107
  3. D. H. Bae, M. H. Lee and D. H. Kim, Applied Physics Letters, 83(12), 2312 (2003) https://doi.org/10.1063/1.1611622
  4. M. H. Lee, D. H. Bae, W. T. Kim, D. H. Kim, E. Rozhkova, P. B. Wheelock and D. J. Sordelet, Journal of Non-crystalline Solids, 315(1-2), 89 (2003) https://doi.org/10.1016/S0022-3093(02)01424-2
  5. M. H. Lee, J. Y. Lee, D. H. Bae, W. T. Kim, D. J. Sordelet and D. H. Kim, Intermetallics, 12(10-11), 1133 (2004) https://doi.org/10.1016/j.intermet.2004.04.027
  6. E. Fleury, J. H. Lee, S. H. Kim, J. S. Kim and D. H. Kim, Met. &Metall, Trans A, 34A, 841 (2003)
  7. Masao Tokita, Journal of Soc. of Powder Technology Japan, 30(11), 790 (1997)
  8. Mizushima Takao, Kozima Akinobu, Makino Akihiro, Inoue Akihisa .Masumoto Ken Proc. of IMR Workshop for the Spark Plasma Sintering, Tohoku Univ. Sendai, Sept. 12th, 23 (1996)
  9. Yoon Bae Kim, Private communication
  10. Joanna R.Groza, ASM Handbook Vol.7, ASM International, 583 (1998)
  11. X. Wang, I. Youchi, A. Inoue, Y. H. Kim and I. B. Kim, Mater. Trans JIM, 38, 1130 (1997)
  12. M. H. Lee, J. S. Park, J.-H. Kim, D. H. Bae, W. T. Kim and D. H. Kim, Materials Letters, 58(26), 3312 (2004) https://doi.org/10.1016/j.matlet.2004.06.026
  13. Washimi shinich, Proc. of IMR Workshop for the Spark Plasma Sintering, Tohoku Univ. Sendai, Sept. 12th, 5 (1996)
  14. S. Yi, T. G Park and D. H. Kim, J. Mater.Res., 115(11), 2425 (2000)