참고문헌
- Kuo, T., Sellnau, M. C. and Theobald, M. A., 'Calculation of Flow in the Piston-Cylinder-Ring Crevices of a Homogeneous-Change Engine and Comparison with Experiment,' SAE Paper 890838, 1989
- McGeehanm J. A., 'A Literature Review of the Effects of Piston and Ring Friction and Lubrication Oil Viscosity on Fuel Economy,' SAE Paper No. 780673, 1978
- Namazian, M. and Heywood, J. B., 'Flow in the Piston-Cylinder-Ring Crevices of a Spark-Ignition Engine: Effect on Hydrocarbon Emissions, Efficiency and Power,' SAE Transaction, Vol. 91, Section 1, pp 261-288, 1982
- Furuhama, S., Hiruma, M. and Tsuzita, M., 'Piston Ring Motion and Its Influence on Engine Tribology,' SAE Paper No. 790860, 1979
- Furuhama, S. and Tada, T., 'On the Flow of the Gas through the Piston Rings,' JSME Bulletin, Vol. 4, No. 16, 1961
- Das, P. K., 'Analysis of Piston Ring Lubrication,' SAE PaperNo. 760008, 1976
- Miltsios, G. K., Patterson, D. J. and Papanastasiou, T. C., 'Solution of the Lubrication Problem and Calculation of the Friction Force on the Piston Ring,' J. of Tribology, Vol. 111, pp. 635-641, 1989 https://doi.org/10.1115/1.3261988
- Chun, Sang Myung, 'A Basic Study on Piston Ring Pack,' Journal of the KSTLE, Vol. 21, No. 2, pp. 83-92, April 2005
- Namazian, M. and Heywood, J., 'Flow in the Piston-Cylinder-Ring Crevices of a Spark-Ignition Engine: Effect on Hydrocarbon Emissions, Efficiency and Power,' SAE Paper No. 820088, 1982
- Smith Jr., M., Tunkel, N., Bachman, H. and Fernandez, W., 'A New Look at Muitigraded Diesel Engine Oils,' SAE Paper No. 760558, 1976
- Hoult, D. P. and Shaw II, B. T., 'The Puddle Theory of Oil Consumption,' Tribology Transactions, Vol. 37, No. 1, pp. 75-82, 1994 https://doi.org/10.1080/10402009408983268
- Taylor, G. I., 'Deposition of a Viscous Fluid on the Wall of a Tube,' Journal of Fluid Mechanics, Vol. 10, pp. 161-165, 1961
- Yun, J. E., Chung, Y., Chun, S. M. and Lee K. Y., 'Study of a Piston Ring Assembly Design through Experimental and Numerical Investigation of Inter-Ring Gas Pressure and Blow-By in a Four-Stroke SI Engine,' ICP-8-174, The 8th International Pacific Conference on Automotive Engineering, Pacific Convention Plaza, Yokohama, Japan, 1995
피인용 문헌
- 엔진 내구시험 시 실린더 보아의 마모에 관한 연구 vol.22, pp.3, 2006, https://doi.org/10.9725/kstle.2006.22.3.131
- 피스톤 링 팩 및 실린더 보아 마모와 오일소모를 고려한 엔진 내구수명 연구 vol.22, pp.3, 2005, https://doi.org/10.9725/kstle.2006.22.3.155
- 엔진 내구시험 시 링 외주면 및 그루브 마모에 관한 연구 vol.22, pp.4, 2006, https://doi.org/10.9725/kstle.2006.22.4.211