Tribology and Lubricants

  • 제21권6호
  • /
  • Pages.278-282
  • /
  • 2005
  • /
  • 2713-8011(pISSN)
  • /
  • 2713-802X(eISSN)
한국트라이볼로지학회 (Korean Tribology Society)
권호 표지
DOI QR코드

DOI QR Code

수윤활 볼베어링의 리테이너 설계 특성

Design Characteristics for Water Lubricated Ball Bearing Retainer

  • 발행 : 2005.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Deep groove ball bearing is installed in a control element of an integral nuclear reactor, where water is used as coolant and lubricant. This bearing is made of STS440C stainless steel for the raceways and the balls to use in radioactive environment and water. It is known that the retainer design affects ball bearing operability and endurance life, however there is no verified retainer design and material for water lubricated ball bearing. Four kinds of retainers are manufactured for the endurance test of water lubricated deep groove ball bearing. Three of them are commercially developed types and the other is designed for this research. It is verified that ball bearings with steel pressed and general plastic retainer can not survive to required life in the water, however bearings with machined type and cylinder type retainer can survive. This proves that one of the major design parameters for water lubricated ball bearing is retainer type and material. In this paper, experimental research of endurance test for water-lubricated ball bearing are reported.

키워드

참고문헌

  1. Zhao Xingzhong, Liu Jiajun, Zhu Baoliang and Miao Hezhou, 'Sliding wear of ceramic/metal pairs under boundary lubrication of water and oil,' Journal of Materials Science and Technology, Vol. 13, No. 5, pp. 409-415, 1997
  2. Vairis, A., 'Investigation of friction behaviour of various mterials under sliding conditions,' European Journal of Mechanics a Solid, Vol. 16, No. 6, pp. 929-945, 1997
  3. Ovaert, T. C., Cheng, H. S. and Shen, M. C. 'Temperature effects on friction and elevated temperature behaviour of base oil-additive combinations under boundary lubricated conditions,' SAE Transanctions, Vol. 100, pp. 1131-1160, 1991
  4. Dumont, B., Blau, P. J. and Crosbie, G. M. 'Reciprocating friction and wear of two silicon nitride-based ceramics against type 316 stainless steel,' Wear, Vol. 238, No. 2, pp. 93-109, 2000 https://doi.org/10.1016/S0043-1648(99)00320-8
  5. Molina, M.A. and Gohar, R., 'Hydrodynamic design of ball bearing cage pockets,' Tribology International, Vol.12, No.1, pp. 15-20, 1979 https://doi.org/10.1016/0301-679X(79)90157-9
  6. Wood, R.A.E. 'Rolling bearing cages,' Tribology, Vol.5, No.1, pp. 14-21, 1972 https://doi.org/10.1016/0041-2678(72)90181-9
  7. 이재선, 김지호, 김종인, '고온 고압 하에서 물로 윤활되는 스테인레스 강의 마찰 특성,' Journal of the KSTLE, Vol. 19, No. 1, pp. 21-25, 2003
  8. 이재선, 김종인, 김지호, 박홍윤, 지성균, '스테인레스강 볼베어링의 수윤활 마찰 특성,' Journal of the KSTLE, Vol. 20, No. 3, pp. 140-144, 2004