DOI QR코드

DOI QR Code

열간 압연에서 2단 사이징 프레스 금형에 의한 슬래브의 변형거동 예측

Deformation Behavior of Slab by Two-Step Sizing Press in a Hot Strip Mill

  • 이상호 (부산대학교 정밀기계공학과) ;
  • 김동환 (진주국제대학교 자동차공학과) ;
  • 변상민 (POSCO 기술연구소 공정제어연구그룹) ;
  • 박해두 (POSCO 기술연구소 공정제어연구그룹) ;
  • 김병민 (부산대학교 기계공학부)
  • 발행 : 2005.12.01

초록

Extensive width reduction of slabs is an important technology for achieving continuous production between the steelmaking and hot rolling processes. However, the vertical horizontal rolling process has many disadvantages, e.g., large width deviations and less efficient width reduction. This study was carried out to investigate the deformation of slab by sizing press with two steps die. To do it, dog-bone and camber are discussed in width sizing process considering the deformation behavior according to the deviation of anvil velocity and the deviation of initial slab temperature. In this paper, the various causes of the sizing press phenomena are mentioned for the purpose of understanding of rolling conditions. As a result, the optimal anvil shape having a minimum-forming load is obtained by FE-simulation and ANN.

키워드

참고문헌

  1. T. Hira, K. Isobe, H. Abe, H. Nikaido, T. Fujisu, S. Zuyama, 1990, Deformation of Slab under Heavy Reduction of Width by Sizing Press, Kawasaki Steel Technical Report, No.22, pp. 32-40
  2. T. Fujitsu, T. Fujimoto, H. Nikaido, M. Nihei, 1989 Development of a slab sizing press for extensive slab width reduction, STEEL TIMES MAY, pp. 266-270
  3. H. Nikaido, K. Fuziwara, H. Abe, M. Nihei, 1984, Development of Slab Sizing Press for Heavy Width Reduction in Hot Strip Mills, Iron and Steel Engineer, Vol. 21, pp. 48-53
  4. Muller, W. Rohde, 1992, Behavior of Slabs under Deformation in a Sizing Press with Large Width Reductions, SMS Technical Report Rolling Mill, Vol. 15, No.5, pp. 139-148
  5. Mougenez, Y. Co, G. Roux, R. Alberny, 1999, Development of Sizing Press at Sollac Fos, Ironmaking and Steelmaking, Vol. 26, No.1, pp. 27-30 https://doi.org/10.1179/030192399676906
  6. '$DEFORM^{TM-}$3D,' SFTC, 1995
  7. D. H. Kim, B. M. Kim, Y. Lee, 2003, Prediction of Wear Profile of Roll Groove in Rod Rolling using Incremental Form of Wear Model, Proc. Instn. Mech. Engrs Part B: J. Engineering Manufacture
  8. D. H. Kim, B. M. Kim, Y. Lee, 2003, Adjustment of Roll Gap for the Dimension Accuracy of Bar in Hot Bar in Hot Bar Rolling Process, International Journal of the KSPE, Vol 4, pp. 56-62
  9. D. H. Kim, D. J. Kim, B. M. Kim, 1999, The Application of Neural Networks and Statistical Methods to Process Design in Metal Forming Processes, Int. J. of Adv. Manuf. Tech., Vol. 15, pp. 886-894 https://doi.org/10.1007/s001700050146
  10. M. S. Chun, J. S. Cheong, I. T. An, Y. H. Moon, 2003, Finite Element Analysis of Slab Deformation under the Width Reduction in Hot Strip Mill, Transactions of Material Processing, Vol. 12, No. 7, pp. 668-674 https://doi.org/10.5228/KSPP.2003.12.7.668
  11. B. M. Kim, D. H. Kim, 2003, Estimation of Die Service Life for Die Cooling Method in Hot Forging, Transactions of Material Processing, Vol. 12, No. 4, pp. 408-413 https://doi.org/10.5228/KSPP.2003.12.4.408

피인용 문헌

  1. Prediction of Plastic Deformation Behavior of the Side Surface of Slab during Hot Rough Rolling vol.23, pp.7, 2014, https://doi.org/10.5228/KSTP.2014.23.7.425
  2. Study on hot rolling process of the D51 large-diameter threaded bars vol.32, pp.4, 2018, https://doi.org/10.1007/s12206-018-0332-4