Performance of a Shell-and-Tube Heat Exchanger with Spiral Baffle Plates

  • Published : 2001.11.01

Abstract

In a conventional shell-and-tube heat exchanger, fluid contacts with tubes flowing up and down in a shell, therefore there is a defect in the heat transfer with tubes due to the stagnation portions . Fins are attached to the tubes in order to increase heat transfer efficiency, but there exists a limit. Therefore, it is necessary to improve heat exchanger performance by changing the fluid flow in the shell. In this study, a highly efficient shell-and-tube heat exchanger with spiral baffle plates is simulated three-dimensionally using a commercial thermal-fluid analysis code, CFX4.2. In this type of heat exchanger, fluid contacts with tubes flowing rotationally in the shell. It could improve heat exchanger performance considerably because stagnation portions in the shell could be removed. It is proved that the shell-and-tube heat exchanger with spiral baffle plates is superior to the conventional heat exchanger in terms of heat transfer.

Keywords

References

  1. AEA Technology, 1997, CFX-4.2 Manual, United Kingdom
  2. Gay, B., Mackley, N. V. and Jenkins, J. D., 1976, 'Shell-Side Heat Transfer in Baffled Cylindrical Shell-and-Tube Heat Exchangers An Electrochemical Mass Transfer Modeling Technique,' Int. J. of Heat and Mass Transfer, Vol. 19, pp. 995-1002 https://doi.org/10.1016/0017-9310(76)90181-2
  3. Incropera, F. P. and Dewitt, D. P., 1996, Fundamentals of Heat and Mass Transfer, 4th ed., John Wiley & Sons Inc., New York
  4. Lee, K. S., Chung, J. Y. and Yoo, J. H., 1998, 'Thermal and Flow Analysis for the Optimization of a Parallel Flow Heat Exchanger,' Transactions of KSME, Part B, Vol. 22, No. 2, pp. 229-239
  5. Lee, K. S. and Kim, W. S., 1999, 'The Effects of Design and Operation Factors on the Frost Growth and Thermal Performance of a Flat Plate Fin-Tube Heat Exchanger Under the Frosting Condition,' KSME International Journal, Vol. 13, No. 12, pp. 973-981
  6. Lee, S. C., Cho, J. W. and Nam, S. C., 1997, 'Effect of Baffle Parameters on Heat Transfer in Shell-and-Tube Heat Exchangers,' Transactions of KSME, Part B, Vol. 21, No. 1, pp. 185-194
  7. Lee, S. C., Cho, J. W. and Ban, T. G., 1998, 'Performance of Heat Transfer and Pressure Drop in a Spirally Indented Tube,' KSME International Journal, Vol. 12, No. 5, pp. 917-925
  8. Li, H. and Kotte, V., 1998a, 'Effect of the Leakage on Pressure Drop and Local Heat Transfer in Shell-and-Tube Heat Exchanger for Staggered Tube Arrangement,' Int. J. of Heat and Mass Transfer, Vol. 41, No. 2, pp. 425-433 https://doi.org/10.1016/S0017-9310(97)00112-9
  9. Li, H. and Kottke, V., 1998b, 'Effect of Baffle Spacing on Pressure Drop and Local Heat Transfer in Shell-and-Tube Heat Exchanger for Staggered Tube Arrangement,' Int. J. of Heat and Mass Transfer, Vol. 41, No. 10, pp. 1303-1311 https://doi.org/10.1016/S0017-9310(97)00201-9
  10. Patankar, S. V., 1980, Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing Co., Washington
  11. Prithiviraj, M. and Andrews, M. J., 1998a, 'Three Dimensional Numerical Simulation of Shell-and-Tube Heat Exchangers, Part I : Foundation and Fluid Mechanics,' Numerical Heat Transfer, Part A, Vol. 33, pp. 799-816
  12. Prithiviraj, M. and Andrews, M. J., 1998b, 'Three Dimensional Numerical Simulation of Shell-and-Tube Heat Exchangers, Part Ⅱ: Heat Transfer,' Numerical Heat Transfer, Part A, Vol. 33, pp. 817-828
  13. Shah, R. K. and Pignitti, A., 1997, 'Influence of a Finite Number of Baffles on Shell-and-Tube Heat Exchanger Performance,' Heat Transfer Engineering, Vol. 18, No. 1, pp. 82-94 https://doi.org/10.1080/01457639708939891
  14. Sparrow, E. M. and Reifschneider, L. G., 1986, 'Effect of Interbaffle Spacing on Heat Transfer and Pressure Drop in a Shell-and-Tube Heat Exchanger,' Int. J. of Heat and Mass Transfer, Vol. 29, No. 11, pp. 1617-1628 https://doi.org/10.1016/0017-9310(86)90103-1
  15. Van Doormaal, J. P. and Raithby, G. D., 1984, 'Enhancements of the SIMPLE Method for Predicting Incompressible Fluid Flows,' Numerical Heat Transfer, Vol. 7, pp. 147-163 https://doi.org/10.1080/01495728408961817
  16. Walker, G., 1990, Industrial Heat Exchangers- A Basic Guide, 2nd ed., Hemisphere Publishing Co., New York