Korean Chemical Engineering Research

  • 제43권4호
  • /
  • Pages.517-524
  • /
  • 2005
  • /
  • 0304-128X(pISSN)
  • /
  • 2233-9558(eISSN)
한국화학공학회 (The Korean Institute of Chemical Engineers)
권호 표지

분무열분해 공정에 의해 합성된 바륨 티타네이트 분말의 결정화 및 형태 특성

Characteristics of Crystallinity and Morphology of Barium Titanate Particles Prepared by Spray Pyrolysis

  • 이교광 (한국화학연구원 화학소재부) ;
  • 정경열 (한국화학연구원 화학소재부) ;
  • 김중현 (연세대학교 화학공학과) ;
  • 구혜영 (건국대학교 화학공학과) ;
  • 주서희 (건국대학교 화학공학과) ;
  • 강윤찬 (건국대학교 화학공학과)
  • Lee, Kyo Kwang (Advanced Materials Division, Korea Research Institute of Chemical Technology) ;
  • Jung, Kyeong Youl (Advanced Materials Division, Korea Research Institute of Chemical Technology) ;
  • Kim, Jung Hyun (Department of Chemical Engineering, Yonsei University) ;
  • Koo, Hye Young (Department of Chemical Engineering, Konkuk University) ;
  • Ju, Seo Hee (Department of Chemical Engineering, Konkuk University) ;
  • Kang, Yun Chan (Department of Chemical Engineering, Konkuk University)
  • 투고 : 2005.01.18
  • 심사 : 2005.06.30
  • 발행 : 2005.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

유기 첨가물을 함유하는 분무용액으로부터 분무열분해 공정에 의해 바륨 티타네이트($BaTiO_3$) 분말을 합성하였다. 분무용액에 첨가되는 유기물의 종류 및 첨가량이 분무열분해 공정에 의해 합성된 $BaTiO_3$ 분말들의 결정구조 및 형태 특성에 미치는 영향을 조사하였다. 유기 첨가물로서 구연산, 에틸렌 글리콜 및 폴리에틸렌 글리콜을 첨가한 경우에 있어서는 유기 첨가물의 종류에 따라 하소 전후에 서로 다른 형태의 $BaTiO_3$ 분말들이 얻어졌다. 분무용액에 구연산을 첨가한 경우에 합성된 $BaTiO_3$ 분말들은 하소 후에 균일한 크기의 나노 분말들로 구성 되어진 나노 구조체를 가졌다. 분무용액에 첨가된 구연산의 양이 증가할수록 하소 후에 얻어진 분말들의 결정구조가 준안정상인 입방정상에서 정방정상으로의 상변환성이 증가하였다. 고농도의 구연산을 함유한 분무용액으로부터 합성된 $BaTiO_3$ 분말들은 하소 후에 좋은 정방정계 결정구조, 균일하며 미세한 크기 및 고표면적을 가졌다. 분무열분해 공정에 의해 합성된 $BaTiO_3$ 분말들은 밀링 공정 후에 균일한 크기 및 형태를 가졌다.

Barium titanate ($BaTiO_3$) particles were prepared by spray pyrolysis from spray solution containing organic additives. The effects of the type and amount of organic precursors on the crystal structure and morphology of the $BaTiO_3$ particles were investigated. It was found that the morphology of $BaTiO_3$ particles before and after calcination depended on the type of organic additives such as citric acid, ethylene glycol and polyethylene glycol. Among these organic additives, citric acid was the most effective to prepare $BaTiO_3$ particles with nano-structured morphology consisting with uniform size nanometer particles after calcination. It was also found that the phase transformability of the metastable cubic phase to the tetragonal one during calcination could be improved by increasing the content of citric acid in the spray solution. As a result, $BaTiO_3$ particles prepared from spray solution containing high concentration of citric acid had good tetragonality, uniform and fine size, and high BET surface area after calcination. $BaTiO_3$ particles prepared by spray pyrolysis had nanometer size and uniform morphology after simple ball milling process.

키워드

참고문헌

  1. Nowotny, J. and Rekas, M., Electro. Ceram. Mater.,(1992)
  2. Newalkar, B. L., Komarneni, S. and Katsuki, H., 'Microwave- Hydrothermal Synthesis and Characterization of Barium Titanate Powders,' Mater. Res. Bull., 36, 2347-2355(2001) https://doi.org/10.1016/S0025-5408(01)00729-2
  3. Maison, W., Kleeberg, R., Heimann, R. B. and Phanichphant, S., 'Phase Content, Tetragonality, and Crystallite Size of Nanocscaled Barium Titanate Synthesized by the Catecholate Process: Effect of Calcination Temperature,' J. Eur. Ceram. Soc., 23, 127-132 (2003) https://doi.org/10.1016/S0955-2219(02)00071-7
  4. Gijp, S., Emond, M. H. J., Winnubst, A. J. A. and Verweij, H., 'Preparation of $BaTiO_{3}$ by Homogeneous Precipitation,' J. Eur. Ceram. Soc., 19(9), 1683-1690(1999) https://doi.org/10.1016/S0955-2219(98)00274-X
  5. Shin, H. S. and Lee, B. K., 'Preparation of Barium Titanate Powders by Oxalate Process,' Bull. Kor. Ceram. Soc., 10(2), 173-181(1995)
  6. Urek, S. and Drofenik, M., 'The Hydrothermal Synthesis of $BaTiO_{3}$ Fine Particles from Hydroxide-Alkoxide Precursors,' J. Eur. Ceram. Soc., 18(4), 279-286(1998) https://doi.org/10.1016/S0955-2219(97)00138-6
  7. Roh, H. S., Kang, Y. C. and Park, S. B., 'Morphology and Luminescence of $(GdY)_{2}O_{3}$:Eu Particles Prepared by Colloidal Seed- Assisted Spray Pyrolysis,' J. Colloid Inter. Sci., 228, 195-199 (2000) https://doi.org/10.1006/jcis.2000.6947
  8. Kim, E. J., Kang, Y. C., Park, H. D. and Ryu, S. K., 'UV and VUV Characteristics of $(YGd)_{2}O_{3}$:Eu Phosphor Particles Prepared by Spray Pyrolysis from Polymeric Precursors,' Mater. Res. Bull., 38, 515-524(2003) https://doi.org/10.1016/S0025-5408(02)01047-4
  9. Lenggoro, I. W., Okuyama, K., De la Mora, J. F. and Tohge, N., 'Preparation of ZnS Nanoparticles by Electrospray Pyrolysis,' J. Aerosol Sci., 31(1), 121-136(2000) https://doi.org/10.1016/S0021-8502(99)00534-0
  10. Lenggoro, I. W., Itoh, Y., Iida, N. and Okuyama, K., 'Control of Size and Morphology in NiO Particles Prepared by a Low-Pressure Spray Pyrolysis,' Mater. Rese. Bull., 38(14), 1819-1827(2003) https://doi.org/10.1016/j.materresbull.2003.08.005
  11. Itoh, Y., Lenggoro, I. W., Okuyama, K., Madler, L. and Pratsinis, S. E., 'Size Tunable Synthesis of Highly $BaTiO_{3}$ Nanoparticles Using Salt-Assisted Spray Pyrolysis,' J. Nano. Res., 5, 191-198(2003) https://doi.org/10.1023/A:1025565614632
  12. Kang Y. C. and Park, S. B., 'A High-Volume Spray Aerosol Generator Producing Small Droplets for Low Pressure Application,' J. Aerosol Sci., 26, 1131-1138(1995) https://doi.org/10.1016/0021-8502(95)00037-D
  13. Xia, B., Lenggoro, I. W. and Okuyama, K., 'Novel Route to Nanoparticle Synthesis by Salt-Assisted Aerosol Decomposition,' Adv. Mater., 13, 1579-1582(2001) https://doi.org/10.1002/1521-4095(200110)13:20<1579::AID-ADMA1579>3.0.CO;2-G
  14. Li, C., Chen, Z., Cui, D., Zhu, Y., Lu, H., Dong, C., Wu, F. and Chen, H., 'Phase Transition Behavior of $BaTiO_{3}$ Thin Films Using High-temperature X-ray Diffraction,' J. Appl. Phys., 86, 4555-4558(1999) https://doi.org/10.1063/1.371402