Acknowledgement
Supported by : POSCO
References
- 경기개발연구원 (1999) 경기도 물류비용 분석 및 물류체계 개선연구
- 과학기술부, 엔지니어링기술진흥법 (1997)
- 건설교통부/시설안전기술공단 (2000) 도로교의 공용수명 연장방안 연구, 시설안전기술공단 연구보고서 BR-2000-R1-37
- 건설교통부/시설안전기술공단 (2001) LCC개념을 도입한 시설안전관리체계 선진화방안 연구, 시설안전기술공단 연구보고서 TS-2001-R3-001
- 사단법인 도로교통협회, 도로교설계기준(2000)
- 서울특별시건설안전관리본부 (2002) 도로관리사업소 시설물유지보수공사 설계지침
- 이광민 (2000) 강상판교의 Life-Cycle Cost 설계, 한양대학교 석사학위논문
- 이수범, 심재익 (1997) 교통사고비용의 추이와 결정요인, 교통개발연구원 연구보고서, 연구총서 97-09
- 원제무 (2000) 알기 쉬운 도시교통, 박영사
- 조효남 (1998) 강상형교의 최적설계 프로그램(CAOD-sb) 개발, 삼보기술단, 1차년도 보고서
- 조효남, 이광민, 김정호, 최영민, 봉연종(2003) 강교의 생애주기비용 최적설계, 강구조학회논문집, 강구조학회, 2003년 8월호
- 조효남, 민대홍, 조준석 (2001) 고속철도 강교량의 총기대비용 최적설계, 대한토목학회논문집, 2001년 9월호, pp.753-760
- 조효남, 이두화, 정지승, 민대홍 (1999) 강상판교의 다목적 다단계 최적설계. 6th International Conference on Steel & Space Structures, pp.313-320
- 정지승 (1999) 강바닥판교의 다단계 다목적 최적설계, 한양대학교 박사학위논문
- 한국강구조학회 (1997) 고속철도의 강교량 활용화에 관한 연구, 최종보고서
- 한국도로공사, 97 도로설계실무편람(1997)
- Albrecht, P. (1983) S-N Fatigue Reliability Analysis of Highway Bridges, Probabilistic Fracture Mechanics and Fatigue Methods: Application for Structural Design and Maintenance, ASTM STP 798
- Ang, A. H-S. and De Leon, D. (1997) Determination of optimal target reliabilities for design and upgrading of structures, Structural Safety, 19(1). pp.91-103 https://doi.org/10.1016/S0167-4730(96)00029-X
- Ang, A. H-S. and Tang, W. H. (1984) Probability Concepts in Engineering Planning and Design. Vol. I and II, John Wiley
- Berthelot, C. F., Sparks, G. A., Blomme, T., Kajner, L., and Nickeson, M. (1996) Mechanistic-probabilistic vehicle operating cost model, Journal of Transportation Engineering, ASCE, 122(5), pp.337-341
- Boisvert, R. N. (1992) Indirect losses from a catastrophic earthquake and the local, regional, and national interest, pp. 209-265 in: Indirect Economic Conse -quences of a Catastrophic Earthquake, Development Technologies, Inc. Washington, D. C.
- Cho, H. N., and Ang, A. H-S. (1989) Reliability Assessment And Reliability-Based Rating of Existing Road Bridges, 5th International Conference on Structural Safety and Reliability, pp.2235- 2238
- Cho, H. N. (2002a) Life Cycle Cost Effectiveness for Design and Rehabilitation of Civil Infrastructures, Proc. of SEWC02
- Cho, H. N., and Ang, A. H-S. Reliability Assessment And Reliability-Based Rating of Existing Road Bridges. 5th International Conference on Structural Safety and Reliability, pp.2235-2238. 1989
- Cho, H. N. and Min D. H. (2002b) Life-Cycle Cost Optimization of Steel Box Girder Bridges, Journal of constructional Steel Research (In Press)
- Cho, H. N., Ang, A. H-S., Lim, J. K., and Lee, K. M. (2001b), Reliability-Based Optimal Seismic Design and Upgrading of Continuous PC bridges Based on Minimum Expected Life-Cycle Costs, Proc. of ICOSSAR01
- Cho, H. N., Min, D. H., and Lee, K. M. (2001a) Optimum Life-Cycle Cost Design of Orthotropic Steel Deck Bridges, Journal of International Steel Structure, ASCE, Vol. 1
- De Brito, J. and Branco, F. A. (1995) Bridge management policy using cost analysis, Proceedings of Institution of Civil Engineers: Structures and Buildings, 104, pp.431-439
- De Brito, J. and Branco, F. A. (1998) Road bridges functional failure costs and benefits, Canadian Journal of Civil Engineering, 25, pp.261-270 https://doi.org/10.1139/cjce-25-2-261
- Estes, A.C. (1997) A System Reliability Approach to the lifetime Optimization of Inspection and Repair of Highway Bridges, Ph.D. Dissertation, Univ. of Colorado
- EMME/2 User's Manual (1999) Software Release 9.0, INRO.1608-1623
- Frangopol, D. M., and Lin, K. Y. (1997) Life-Cycle Cost Design of Deteriorating Structures, Journal of Struct. Eng., ASCE, Vol. 123, No. 10
- Hart, G. C. Uncertainty Analysis, Loads, and Safety in Structural Engineering. Prentice-Hall, 1982
- Kuribayashi, E. and T. Tazaki (1983) Outline of the earthquake disaster, pp.67-90 in : Report on the Disaster Caused by the Miyagi-ken-oki Earth -quake of 1978, Report No. 159, Public Work Research Institute, Ministry of Construction, Japan
- Lee, J. C. (1996) Reliability-based cost effective aseismic design of reinforced concrete frame-wall building, Ph.D dissertation, Univ. of California Irvine
- Melchers, R. E. (1987) Structural Reliability, Analysis and Prediction, Ellis Horwood Ltd., West Sussex, England
- Nowak, A.S. (1992) Calibration of LRFD Bridge Design Code, National Cooperative Highway Research, Final Report pp.12-33
- Seskin, S. N. (1990) Comprehensive framework for highway economic impact assessment methods and result, Transportation Research Record 1274, Transporationa Research Board, Washington, D.C., pp.24-34
- Stewart M.G. and Hossain, M.B. (2001) Timedependant Deflection, Serviceability Reliability and Expected Cost for RC beams, Structural Safety and Reliability, Corotis et. al. (eds)
- Vanderplaats, Garret N. (1986) ADS: A FORTRAN Program for Automated Design Synthesis. Engineering Design Optimization, INc, Santa Barbara, California
- Wen, Y. K. and Kang, Y. K. (1997) Optimal seismic design based on life-cycle cost, Proceedings of the International Workshop on Optimal Performance of Civil Infrastructure Systems, ASCE, Portland, Oregon, pp.194-210
- Zhao, Z., Haldar, A., and Breen Jr, F. L., Fatigue-reliability evaluation of steel bridges, J. Struct. Engrg., ASCE, Vol.120, No.5, 1994, pp.1608- 1623