Development of Bidirectional Pulse Power Electrochemical Etching System for the Groove Manufacturing of the Dynamic Bearings

동압베어링의 그르브 가공용 양방향 펄스 파워 전해가공시스템 개발

  • 이용근 (인하공업전문대학 전기정보과학과)
  • Published : 2005.12.31

Abstract

This paper presents a bidirectional pulse power electrochemical etching system for groove manufacturing of the dynamic bearings. To manufacture the dynamic bearing for the groove, it is very important to consider the depth and roughness. If the precision of the groove is not exact, we can not get the desirable performance for the target of the dynamic bearing. To make the groove of bearing precise, we propose the method of electrochemical etching system. In order to design the depth and roughness exactly, the bidirectional pulse power converter is proposed. With the bidirectional pulse power converter, we obtain the condition and the parameters of converter such as frequency, duty ratio, time, temperature, velocity, pressure and so on. In this paper, we get the experimental results to verify the precise groove manufacturing.

Keywords

References

  1. Hamrock, B. j., 1994, 'Fundamentals of Fluid Film Lubrication, 'McGRAW -HILL series in Mechanical Engineering, International Editions, pp. 218-277
  2. Fuller. D. D., 1984, 'Theory and Practice of Lubrication For Engineers,' John Wiley & Sons, inc., A Wiley-Interscience Publication,' pp. 198-548
  3. 강경필, 1997, '오일윤활 빗살무늬 저어널 베어링에 대한 정특성 및 안정성 해석', 연세대학교 기계공학과 박사학위논문
  4. Shin, D. W., 1999, 'A Study on the Characteristics of the Oil-Lubricated Herringbone Groove Journal Bearing Using Finite Element Method,' M. Eng. Thesis, Yonsei University
  5. Nidec Interim Results, Fy2001, Nidec Corporation, 2001.10
  6. Tsugio Yamamoto, Minebia Investor Meeting In US, 2001.7
  7. J.R. Hendershot Jr and Tje Miller, 'Design of Brushless Permanent-Magnet Motors', Clarendon Press, 1994
  8. 'Motor Application Note', Ansoft, 2000
  9. Alan Jack at el, ' Permanent Magnet Machines with Powdered Iron Sores and Pre-pressed Windings'IEEE IAS, 1999
  10. Jang, G. H., Kim Y. J., 'Calculation of dynamic coefficients in a hydrodynamic bearing considering five degrees of freedom for a general rotor-bearing system,' ASME Journal of Tribology, Vol.121, pp. 499-505, 1999 https://doi.org/10.1115/1.2834095
  11. 양승헌, 강병희, 전윤석, 목형수, 최규하, '전류제어형 펄스 전원장치를 이용한 수산화가스 발생 특성연구', 전력전자학술대회 논문집, pp. 257-262, 2000
  12. 강필순, 이정한, 박성준, 김철후, '양방향 전력수수가 가능한 이동식 전원장치의개발', 전력전자논문집 제7권 제4호, pp. 339-345, 2002