References
- Martin, H., 1977, Heat and mass transfer between impinging gas jets and solid surfaces, Advances in Heat Transfer, Vol. 13, pp. 1-60 https://doi.org/10.1016/S0065-2717(08)70221-1
- Viskanta, R., 1993, Heat transfer to impinging isothermal gas and flame jets, Experimental Thermal and Fluid Science, Vol. 6, pp. 111-134 https://doi.org/10.1016/0894-1777(93)90022-B
- Jambunathan, K, Lai, E., Moss, M; A. and Button, B. L., 1992, A review of heat transfer data for single circular jet impingement, lnt. J. Heat Fluid Flow, Vol. 13, No.2, pp. 106-115 https://doi.org/10.1016/0142-727X(92)90017-4
- Webb, B. W. and Ma, C.-F., 1995, Single phase liquid jet impingement heat transfer, Advances in Heat Transfer, Vol. 26, pp. 105-217
- Lee, J. and Lee, S.J., 2000, The effect of nozzle aspect ratio on stagnation region heat transfer characteristics of elliptic impinging jet, lnt. J. Heat Mass Transfer, Vol. 43, No. 4, pp. 555-575 https://doi.org/10.1016/S0017-9310(99)00167-2
- Lee, D. H., Won, S. Y., Kim, Y. T. and Chung, Y. S., 2002, Turbulent heat transfer from a flat surface to a swirling round impinging jet, Int. J. Heat Mass Transfer, Vol. 45, No. 1, pp. 223-227 https://doi.org/10.1016/S0017-9310(01)00135-1
- Wen, M. Y. and Jang, K. J., 2003, An impingement cooling on a flat surface by using circular jet with longitudinal swirling strips, Int. J. Heat Mass Transfer, Vol. 46, pp.4657-4667 https://doi.org/10.1016/S0017-9310(03)00302-8
- Choi, J. W., Jean, Y. W., Park, S. W. and Chung, I. K., 2003, An experimental study on characteristics of swirl jet impingement heat transfer for arrangement chips, Proceedings of SAREK Summer Annual Conference, pp. 1303-1308
- Zhou, D. W. and Lee, S. J., 2004, Heat transfer enhancement of impinging jets using mesh screens, Int. J Heat Mass Transfer, Vol. 47, pp.2097-2108 https://doi.org/10.1016/j.ijheatmasstransfer.2003.12.002
- Gao, N., Sun, H. and Ewing, D, 2003, Heat transfer to impinging round jets with triangular tabs, Int. J Heat Mass Transfer, Vol. 46, pp.2557-2569 https://doi.org/10.1016/S0017-9310(03)00034-6
- Beitelmal, A. H., Saad, M. A. and Patel, C. D., 2000, The effect of inclination on the heat transfer between a flat surface and an impinging two-dimensional air jet, Int. J. Heat Fluid Flow, Vol. 21, No.2, pp. 156-163 https://doi.org/10.1016/S0142-727X(99)00080-6
- Song, H. B., Yoon, S. H. and Lee, D. H., 2000, Flow and heat transfer characteristics of a two-dimensional oblique wall attaching offset jet, Int. J. Heat Mass Transfer, Vol. 43, No. 13, pp. 2395-2404 https://doi.org/10.1016/S0017-9310(99)00312-9
- Chan, T. L., Leung, C. W., Jambunathan, K., Ashforth-Frost, S., Zhou, Y. and Liu, M. H., 2002, Heat transfer characteristics of a slot jet impinging on a semi-circular convex surface, Int. J. Heat Mass Transfer, Vol. 45, No. 5, pp. 993-1006 https://doi.org/10.1016/S0017-9310(01)00217-4
- Choi, M. S., Yoo, H. S., Yang, G., Lee, J. S. and Sohn, D. K., 2000, Measurements of impinging jet flow and heat transfer on a semi-circular concave surface, Int. J. Heat Mass Transfer, Vol. 43, pp, 1811-1822 https://doi.org/10.1016/S0017-9310(99)00257-4
- Lim, K. B., Choi, H. C., Lee, S. G., Choi, S. K. and Kim, H. J., 2000, Turbulent heat transfer of an oblique impinging jet on a concave surface, Korean Journal of Air-Conditioningand Refrigeration Engineering, Vol. 12, No.4, pp.371-380
- Cornaro, C., Fleischer, A. S. and Goldstein, R. J., 1999, Flow visualization of a round jet impinging on cylindrical surface, Experimental Thermal and Fluid Science, Vol. 20, pp. 66-78 https://doi.org/10.1016/S0894-1777(99)00032-1
- Gau, C. and Lee, I. C., 2000, Flow and impingement cooling heat transfer along triangular rib-roughened walls, Int. J. Heat Mass Transfer, Vol. 43, pp. 4405-4418 https://doi.org/10.1016/S0017-9310(00)00064-8
- Pyo, C. K., Park, S. R., Kim, D. C., Kum, S. M. and Yim, J. S., 2000, Heat transfer characteristics in impinging air jet with hybrid rod, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 12, No.3, pp. 277-283
- Yim, S. H., Sihn, C. H. and Cho, H. H., 2004, Effect of surface roughness on two-phase flow heat transfer by confined liquid impinging jet, Proceedings of SAREK Winter Annual Conference, pp. 63-68
- McDaniel, C. S. and Webb, B. W., 2000, Slot jet impingement heat transfer from circular cylinders, Int. J. Heat Mass Transfer, Vol. 43, No. 11, pp. 1975-1985 https://doi.org/10.1016/S0017-9310(99)00267-7
- Hwang, J. Kim, S. Y. and Kang, B. H., 2002, Effect of confinement plate size on convective heat transfer from an aluminum foam heat sink in a confined impinging air jet, Proceedings of SAREK Summer Annual Conference, pp. 152-157
- Camci, C. and Herr, F., 2002, Forced convection heat transfer enhancement using a self-oscillating impinging planar jet, ASME J. Heat Transfer, Vol. 124, No.4, pp.770-782 https://doi.org/10.1115/1.1471521
- Hwang, S. D., Lee, C. H. and Cho, H. H., 2001, Heat transfer and flow structures in axismmetric impinging jet controlled by vortex pairing, Int. J. Heat Fluid Flow, Vol. 22, No.2, pp.293-300 https://doi.org/10.1016/S0142-727X(01)00091-1
- Hwang, S. D. and Cho, H. H., 2003, Effects of acoustic excitation positions on heat transfer and flow in axisymmetric Impinging jet: main jet excitation and shear layer excitation, Int. J. Heat Fluid Flow, Vol. 24, No.2, pp. 199-209 https://doi.org/10.1016/S0142-727X(02)00236-9
- Mladin, E. C. and Zumbrunnen, D. A., 2000, Alterations to coherent flow structures and heat transfer due to pulsations in an impinging air-jet, Int. J. Thermal Sci., Vol. 39, No.2, pp. 236-248 https://doi.org/10.1016/S1290-0729(00)00242-8
- San, J. Y. and Lai, M. D., 2001, Optimum jet-to-jet spacing of heat transfer for staggered arrays of impinging air jets, Int. J. Heat Mass Transfer, Vol. 44, No. 21, pp.3997-4007 https://doi.org/10.1016/S0017-9310(01)00043-6
- Brevet, P., Dejeu, C., Dorignac, E., Jolly, M. and V ullierme, J.J., 2002, Heat transfer to a row of impinging jets in consideration of optimization, Int. J. Heat Mass Transfer, Vol. 45, No. 20, pp. 4191-4200 https://doi.org/10.1016/S0017-9310(02)00128-X
- Ekkad, S. V. and Kontrovitz, D., 2002, Jet impingement heat transfer on dimpled target surfaces, Int. J. Heat Fluid Flow, Vol. 23, No.1, pp. 22-28 https://doi.org/10.1016/S0142-727X(01)00139-4
- Kanokjaruvijit, K and Martinez-botas, R. F., 2005, Jet impingement on a dimpled surface with different crossflow schemes, Int. J. Heat Mass Transfer, Vol. 48, pp. 161-170 https://doi.org/10.1016/j.ijheatmasstransfer.2004.08.005
- Nakabe, K, Fomalik, K, Eschenbacher, J. F., Yamamoto, Y, Ohta, T. and Suzuki, K, 2001, Interactions of longitudinal vortices generated by twin inclined jets and enhancement of impingement heat transfer, Int. J. Heat Fluid Flow, Vol. 22, No.3, pp.287-292 https://doi.org/10.1016/S0142-727X(01)00090-X
- Son, C., Gillespie, S., Ireland, P. and Dailey, C. M., 2001, Heat Transfer and Flow Characteristics of an Engine Representative Impingement Cooling System, ASME Paper No.2001-GT-I54
- Gao, L. and Srinath, V. E., 2003, Impingement Heat Transfer under Linearly Stretched Arrays of Holes, ASME Paper No. GT200338178
- Taslim, M. E., Setayeshgar, L. and Spring, S. D., 2001, An experimental evaluation of advanced leading edge impingement cooling concepts, ASME J. of Turbomachinery, Vol. 123, pp.147-153 https://doi.org/10.1115/1.1331537
- Rhee, D. H., Yoon, P. H. and Cho, H. H., 2003, Local heat/mass transfer and flow characteristics of array impinging jets with effusion . holes ejecting spent air, Int. J. Heat Mass Transfer, Vol. 46, No.6, pp. 1049-1061 https://doi.org/10.1016/S0017-9310(02)00363-0
- Hong, S. K., Rhee, D. H. and Cho, H. H., 2005, Effects of fin shapes and arrangements on heat transfer for impingement/effusion cooling with crossflow, ASME Paper No. GT2005-68684
- Iacovides, H., Kounadis, D., Launder, B. E., Li, J. and Xu, Z., 2005, Experimental study of the flow and thermal development of row of cooling jets impinging on a rotating concave surface, ASME J. of Turbomachinery, Vol. 127, pp.222-229 https://doi.org/10.1115/1.1812778
- Hwang, J.J. and Cheng, C. S., 2001, Impingement cooling in triangular ducts using an array of side-entry wall jets, Int. J. Heat Mass Transfer, Vol. 44, No.5, pp.1053-1063 https://doi.org/10.1016/S0017-9310(00)00141-1
- Yan, W. M.,Mei, S. C., Liu, H. C., Soong, C. Y. and Yang, W.-J., 2004, Measurement of detailed heat transfer on a surface under arrays of impinging elliptics jets by a transient liquid crystal technique, Int. J. Heat Mass Transfer, Vol. 47, pp.5235-5245 https://doi.org/10.1016/j.ijheatmasstransfer.2004.06.031
- Haiping, C., Jingue, Z. and Taiping, H., 2000, Experimental Investigation on Impingement Heat Transfer From Rib-Roughened Surface Within Arrays of Circular Jets: Correlation, ASME PaperNo. 2000-GT-220
- Chatterjee, A. and Deviprasath, L. J., 2001, Heat transfer in confined laminar axisymmetric impinging jets at small nozzle-plate distances: The role of upstream vorticity diffusion, Numer. Heat Transfer Part A. Applications, Vol. 39, No.8, pp .. 777-800 https://doi.org/10.1080/713837278
- Ichimiya, K., Takema, S., Morimoto, S., Kunugi, T. and Akino, N., 2001, Movement of impingement heat transfer by a single circular jet with a confined wall, Int. J. Heat Mass Transfer, Vol. 44, No. 16, pp. 3095-3102 https://doi.org/10.1016/S0017-9310(00)00341-0
- Miranda, J. M. and Campos, J., 2001, Impinging jets confined by a conical wall-high Schmidt mass transfer predictions in laminar flow, Int. J. Heat Mass Transfer, Vol. 44, No.7, pp.1269-1284 https://doi.org/10.1016/S0017-9310(00)00190-3
- Aldabbagh, L. B. Y. and Sezai, I., 2002, Numerical simulation of three-dimensional laminar multiple impinging square jets, Int. J. Heat Fluid Flow, Vol. 23, No.4, pp. 509-518 https://doi.org/10.1016/S0142-727X(02)00141-8
- Fu, W. S., Wang, K. N. and Ke, W. W., 2001, An investigation of a block moving back and forth on a heat plate under a slot jet, Int. J. Heat Mass Transfer, Vol. 44, No. 14, pp.2621-2631 https://doi.org/10.1016/S0017-9310(00)00305-7
- Bula, A. J, Rahman, M. M. and Leland, J. E., 2000, Numerical modeling of conjugate heat transfer during impingement of free liquid jet issuing from a slot nozzle, Numer. Heat Transfer Part A. Appl., Vol. 38, No.1, pp. 45-66 https://doi.org/10.1080/10407780050134965
- Chung, . Y. M., Luo, K. H. and Sandham, N. D., 2002, Numerical study of momentum and heat transfer in unsteady impinging jets, Int. J. Heat Fluid Flow, Vol. 23, No.5, pp. 592-600 https://doi.org/10.1016/S0142-727X(02)00155-8
- Behnia, M., Parneix, S. and Durbin, P. A., 1998, Prediction of heat tansfer in an axisymmetic turbulent jet impinging on a flat plat, Int. J Heat Mass Transfer, Vol. 41, pp. 1845-1855 https://doi.org/10.1016/S0017-9310(97)00254-8
- Thielen, L., Jonker, H. J J and Hanjalic, K, 2003, Symmetry breaking of flow and heat transfer in multiple impinging jets, Int. J. Heat Fluid Flow, Vol. 24, pp. 444-453 https://doi.org/10.1016/S0142-727X(03)00042-0
- Park, T. S. and Sung, H. J, 2001, Development of a near-wall turbulence model and application to jet impingement heat transfer, Int. J. Heat Fluid Flow, Vol. 22, No.1, pp. 10-18 https://doi.org/10.1016/S0142-727X(00)00069-2
- Chattopadhyay, H., Biswas, G. and Mitra, N. K, 2002, Heat transfer from a moving surface due to impinging slot jets, ASME J. Heat Transfer, Vol. 124, No. 3, pp.433-440 https://doi.org/10.1115/1.1470489
- Kalita, K., Dewan, A. and Dass, A. K., 2002, Prediction of turbulent plane jet in crossflow, Numer. Heat Transfer Part. A-Appl., Vol. 41, No.1, pp.101-11I https://doi.org/10.1080/104077802317221465
- Olsson, E. E. M., Ahrne, L. M. and Tragardh, A. C., 2004, Heat transfer from a slot air jet impinging on a circular cylinder, J of Food Engineering, Vol. 63, pp. 393-401 https://doi.org/10.1016/j.jfoodeng.2003.08.009