초록
본 논문은 퍼지제어기를 이용한 엘리베이터용 표면 부착형 영구자석 동기전동기의 벡터제어기법에 관하여 기술한다. PI제어기를 속도제어기로 사용하는 기존의 엘리베이터 시스템은 기계적 공진 때문에 게인값을 높은 값으로 선정하지 못하여 시스템의 성능이 떨어지는 단점이 있다. 이러한 점을 보완하기 위해 속도제어기에 가속도 피드백 루프를 추가하는 방법이 제안되었지만, 제어기의 구현을 위해 파라미터 정보가 필요하다는 단점을 가지고 있다. 본 논문에서는 속도제어기에 기존의 PI제어기 대신 퍼지제어기를 적용하여 벡터제어기법을 구현하였다. 퍼지제어기의 성능을 검증하기 위해 무부하 및 부하조건에서 시뮬레이션과 실험을 실시하여 PI제어기와 비교하였다.
This paper proposes the fuzzy logic based vector control method for a Surface Mounted Permanent Magnet Synchronous Motor(SMPMSM) used in the elevators. The gain of a conventional PI speed controller in the elevator drive system can not be usually set high due to mechanical resonances, therefore its performance becomes deteriorated. There have been many methods to solve above problems such as an acceleration feedback in the speed controller. However, the above methods have defects that parameter information is demanded. In this paper', a Fuzzy controller(FC) is adopted in the elevator drive system. The performance of a fuzzy controller is compared with a PI controller in the no load and load conditions by simulation and experiments.