한국공작기계학회논문집 (Transactions of the Korean Society of Machine Tool Engineers)

한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

예압과 냉각조건에 따른 고주파 모터 내장형 주축계의 열특성

Thermal Characteristics of the High Frequency Motor Spindle according to the Bearing Preloads and Cooling Conditions

  • 최대봉 (한국기계연구원 초정밀기계팀) ;
  • 김수태 (창원대학교 대학원 기계공학과) ;
  • 정성훈 (창원대학교 대학원 기계공학과) ;
  • 김진한 (창원대학교 대학원 기계공학과) ;
  • 김용기 (㈜코스핀)
  • 발행 : 2005.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Use of the high frequency motor spindles are increasing for the high speed machine tools recently. The important problem in the high speed spindles is to reduce and minimize the thermal effect by the motor and ball hearings. Thermal characteristics according to the bearing preload and spindle cooling are studied for the spindle with the oil mist lubrication and high frequency motor. Temperature distribution and thermal displacement according to the spindle speed, preload and flow rate are measured. Temperature distribution and thermal displacement of the high speed spindle system can be estimated reasonably by using the three dimensional model through the finite element method. The results of analysis are compared with the measured data. This study supports thermal optimization and find out more effective cooling condition. This paper show that the suitable preload and spindle cooling are very effective to minimize the thermal effect by the motor and ball bearings.

키워드

참고문헌

  1. Nakamura, S., 1991, 'High Performed Machine Tool Spindles,' J. of JSPE., Vol. 4. No. 57, pp. 605-609
  2. Muramatsu, A., Nakamura, S., Yoneyama, H., and Iwasaki, O., 1994, 'Heat Conduction Analysis for Motor Integrated Spindle,' NSK Technical Journal, No. 658, pp. 32-39
  3. Bossmanns, B., and Tu, J. F., 2001, 'A Power Flow Model for High Speed Motorized Spindles - Heat Generation Characterization,' ASME J. of manufacturing science and engineering, Vol. 123, No. 3, pp. 494-505 https://doi.org/10.1115/1.1349555
  4. Choi, D. B., Kim, S. T., Jung, S. H.,and Kim, Y. K., 2004, 'Thermal Characteristics of the High Speed Motor Spindle by the Variation of Bearing Preload and Cooling Conditions,' Machine engineering, Vol. 4, No. 1-2
  5. Choi, D. B., Kim, S. T., Jung, S. H., and Kim, Y. K., 2004, 'Thermal characteristics according to the preload and cooling conditions for the high frequency motor spindle with grease lubrication,' Proc. of 2004 KSMTE spring Conf., pp. 439-444
  6. Kim, J. K., Kim, S. B., Lee, J. K., and Kim, H. J., 1999, 'A Study on the Thermal Behavior of Machine Tool Spindle System,' J. of KSMTE, Vol. 8, No. 1, pp. 28-34
  7. FAG Hanwha Bearings Corp., Catalogue, WL 41 520/2 KA
  8. Harris, T. A., 2001, 'Rolling Bearing Analysis,' John Wiley & Sons, Inc
  9. Kreith, F., and Bohn, M. S., 1993, Principles of 'Heat Transfer, Fifth edition,' Thomson Learning College