DOI QR코드

DOI QR Code

시간영역유한차분법을 이용한 극초고주파용 CPW의 최적화 설계

Optimum Design of EHF CPW using FDTD

  • 발행 : 2005.12.01

초록

The purpose of this reserch is to establish the new design technology for microwave Coplanar structure. The components in microwave circuit are classified to transmission devices, EM devices, and quasi-TEM devices. After design of these devices, we analyzed these CPWs electromagnetically using FDTD method, and suggested optimum CPW structure. In oder to realize a CPW module up to 30 GHz-100 GHz band, we research on a technology of 3-dimensional microwave CPW, and GaAs substrate with Si layer for ohmic loss. As a result this research, we suppressed the leakage, resonance, coupling, and radiation of CPW EMI, and improved resonance quality of CPW.

키워드

참고문헌

  1. H.-Y. Lee, 'Wideband characterization of a typical bonding wire for microwave and millimeterwave integrated circuits', IEEE Trans. Microwave Theory and Tech, Vol. MTT-43, No.1, p. 63, 1995
  2. 박윤권, 이덕중, '수직형 Feed-throu호 갖는 RF-MEMS 소자의 웨이퍼 레벨 패키징', 전기전자재료학회논문지, 15권, 10호, p. 889, 2002
  3. T. Krems, W. Haydl, H. Massler, and J. Rudiger, 'Millimeter-wave performance of interconnections using wire bonding and flip chip', Proc. IEEE MTT-s. Dig., San Francisco, CA, p. 247, 1996
  4. T. Krems, W. H. Haydl, H. Massler, and J. Rudiger, 'Advantages of flip chip technology in millimeter-wave packaging', IEEE MTT-S lnt. Microwave Symp. Dig., p. 987, 1997
  5. G.-A. Lee and H.-Y. Lee, 'Suppression of Leakage and Crosstalk in Typical Millimeter -wave Flip-chip Packages', 6th Topical Meeting on Electrical Performance of Electronic Packaging, EPEP 97, p. 195, 1997
  6. 이계안, 이해영, '밀리미터파 플립 칩 실상구조 에서의 누설파와 간섭효과 억제방법', 전자공학회논문지-D, 35권, 4호, p. 40, 1998
  7. B. Golia, H. B. Sequeira, S. Duncan, G. Mendenilla, and N. E. Byer, 'A Coplanar-to-microstrip Transition for W -band Circuit Fabrication with 100-$\mu$m-thick GaAs Wafers', IEEE MTT-S lnt. Microwave Symp. Dig., p. 889, 1999