Korea-Australia Rheology Journal

The Korean Society of Rheology (한국유변학회)
권호 표지

Rheology of flocculated kaolinite dispersions

  • McFarlane A.J. (Ian Wark Research Institute, University of South Australia) ;
  • Addai-Mensah J. (Ian Wark Research Institute, University of South Australia) ;
  • Bremmell K. (Ian Wark Research Institute, University of South Australia)
  • Published : 2005.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Rheological characterisation of flocculated kaolinite pulps has been undertaken to elucidate particle interactions underpinning the dewatering behaviour induced by flocculation with polyethylene oxide (PEO), anionic polyacrylamide (PAM A) and their blends. Shear yield stress $(\tau_y)$ analysis indicated that polymer mediated particle interactions were markedly amplified upon shear of PEG based pulps. In contrast, PAM A based pulps showed a significant decrease in yield values upon shear. Steady stress measurements analysed using a modified Ellis model indicated subtle differences between the respective linear viscoelastic plateaus of the pulps. Furthermore, modified shear thinning behaviour was evident in PEG based pulps. Estimation of elastic and viscous moduli (G', G') was made using dynamic stress analysis for comparison with values determined from vane measurements. Despite a noticeable difference in the magnitude of G' between the two methods, similar trends indicating sheared PEG-based pulps to be more elastic than PAM based pulps, were observed. Floc microstructural observations obtained in support of rheological properties indicate that PEG flocculant induces significantly more compact particle aggregation within the clay pulps under shear consistent with the yield stress data, in contrast to PAM A, or indeed unsheared PEG based pulps. Consequentially, sheared PEG based pulps show significantly improved dewatering behaviour. The implications of the results, potential benefits and drawbacks of flocculation with PEG and PAM A are discussed with respect to improvements in current dewatering processes used in the minerals industry.

Keywords

References

  1. Alderman, N. J., G. H. Meeten and J. D. Sherwood, 1991, Vane rheometry of bentonite gels, Journal of Non-Newtonian Fluid Mechanics 39(3), 291-310 https://doi.org/10.1016/0377-0257(91)80019-G
  2. Barnes, H. A. and D. Bell, 2003, Controlled-stress rotational rheometry: An historical review, Korea-Australia Rheology Journal 15(4), 187-196
  3. Besra, L., D. K. Sengupta, S.K. Roy and P. Ay, 2002, Flocculation and dewatering of kaolin suspensions in the presence of polyacrylamide and surfactants, International Journal of Mineral Processing 66, 203-2325 https://doi.org/10.1016/S0301-7516(02)00066-2
  4. Farrow, J. B., R. R. M. Johnston, K. Simic and J.D. Swift, 2000, Consolidation and aggregate densification during gravity thickening, Chemical Engineering Journal 80(1-3), 141-148 https://doi.org/10.1016/S1383-5866(00)00083-6
  5. Herrington, T. M., B.R. Midmore and J.C. Watts, 1993, Flocculation of kaolin suspensions by polyelectrolytes, Colloidpolymer interactions: particulate, amphiphilic and biological surfaces. Penger Tong and Paul L. Dubin (Eds), ACS, Washington D.C.
  6. Jogun, S. and C.F. Zukoski, 1996, Rheology of dense suspensions of platelike particles, Journal of Rheology 40, 1211-1232 https://doi.org/10.1122/1.550798
  7. M'bodj, O., N. Kbir Ariguib, M. Trabselsi Ayadi and A. Magnin, 2004, Plastic and elastic properties of the systems interstratified clay-water-electrolyte-xanthan, Journal of Colloid and Interface Science 273, 675-684 https://doi.org/10.1016/j.jcis.2004.02.028
  8. McFarlane, A. J., J. Addai-Mensah and K. Bremmell, 2005, Improved dewatering behaviour of clay dispersions via optimised interfacial chemistry and particle interactions, Journal of Colloid and Interface Science 294, 116-127
  9. Meeten, G.H., 1993, Shear and compressive yield in the filtration of a bentonite suspension, Colloids and Surfaces A: Physicochemical and Engineering Aspects
  10. Mpofu, P., J. Addai-Mensah and J. Ralston, 2003, Investigation of the effect of polymer structure type on flocculation, rheology and dewatering behaviour of kaolinite dispersions, International Journal of Mineral Processing 71, 247-268 https://doi.org/10.1016/S0301-7516(03)00062-0
  11. Nguyen, Q. D. and D. V. Boger, 1983, Yield stress measurement for concentrated suspensions, Journal of Rheology 27, 321- 349 https://doi.org/10.1122/1.549709
  12. Roberts, G. P., H. A. Barnes and P. Carew, 2001, Modelling the flow behaviour of very shear-thinning liquids, Chemical Engineering Science 56(19), 5617-5623 https://doi.org/10.1016/S0009-2509(01)00291-3
  13. Scales, P. J., S. B. Johnson, T. W. Healy and P.C. Kapur, 1998, Shear yield stress of partially flocculated colloidal suspensions, AIChE Journal 44, 538-544 https://doi.org/10.1002/aic.690440305
  14. Sofra, F. and D. V. Boger, 2002, Environmental rheology for waste minimisation in the minerals industry, Chemical Engineering Journal 86(3), 319-330 https://doi.org/10.1016/S1385-8947(01)00225-X
  15. Usher, S. P., R. G. de Krester and P.J. Scales, 2001, Validation of a new filtration technique for dewaterability characterization, AIChE Journal 47(7), 1561-1570 https://doi.org/10.1002/aic.690470709
  16. Zhou, Z., P. J. Scales and D. V. Boger, 2001, Chemical and physical control of the rheology of concentrated metal oxide suspensions, Chemical Engineering Science 56(9), 2901- 2920 https://doi.org/10.1016/S0009-2509(00)00473-5