한국초전도ㆍ저온공학회논문지 (Progress in Superconductivity and Cryogenics)
- 제7권4호
- /
- Pages.24-27
- /
- 2005
- /
- 1229-3008(pISSN)
- /
- 2287-6251(eISSN)
Conceptional Design of HTS Magnets for 600 kJ Class SMES
- Park Myung-Jin (Korea Polytechnic Univ.) ;
- Kwak Sang-Yeop (Seoul National Univ.) ;
- Kim Woo-Seok (Electrical Engineering and Science Research Institute) ;
- Lee Seung-Wook (Electrical Engineering and Science Research Institute) ;
- Lee Ji-Kwang (Woosuk Univ.) ;
- Choi Kyeong-Dal (Korea Polytechnic Univ.) ;
- Jung Hyun-Kyo (Seoul National Univ.) ;
-
Seong Ki-Chul
(Korea Electrotechnology Institute) ;
- Hahn Song-yop (Electrical Engineering and Science Research Institute)
- 발행 : 2005.11.01
초록
Development of a 600 kJ class Superconducting Magnetic Energy Storage (SMES) system is being in progress by Korea Electrotechnology Research Institute(KERI). High temperature superconducting (HTS) wires are going to be used for the windings for the SMES system is presented in this paper. We considered BSCCO-2223 wire for the HTS windings and the operating temperature of the winding was decided to be 20 K which will be accomplished by conduction cooling method using cyro-coolers. Auto-Tuning Niching Genetic Algorithm was adopted for an optimization method of the HTS magnets in the SMES system. The objective function of the optimal process was minimizing total amount of the HTS wire. As a result, we obtained output parameters for optimization design of 600 kJ class SMES under several constrained conditions. These HTS windings are going to be applied to the SMES system whose purpose is stabilization of the power grid.