참고문헌
- Kolanowski, B. F., 2004, Guide to Microturbines, Fairmont Press, USA, pp. 1-2
- 김경수, 이시우, 김숭우, 2004, '분산형 마이크로터빈 열병합 발전시스템 소개', 유체기계저널, 제7권 제3호, pp. 88-91
- Came, P. M. & Herbert, M. V., 1980, 'Design and Experimental Performance of Some High Pressure Ratio Centrifugal Compressors,' AGARD Conference Paper No. 15
- Ishida. M., Ueki. H. & Senoo. Y., 1990, 'Effect of Blade Tip Configuration on Tip Clearance Loss of a Centrifugal Impeller,' ASME Journal of Turbomachinery, Vol. 112, pp. 14-18 https://doi.org/10.1115/1.2927412
- Hayarni, H., 1997, 'Research and Development of a Transonic Turbo Compressor,' Turbomachinery Fluid Dynamics and Heat Transfer, pp. 63-82
- Senoo, Y., & Ishida. M., 1987, 'Deterioration of Compressor Due to Tip Clearance of Centrifugal Impellers,' ASME Journal of Turbomachinery, Vol. 109, pp. 55-60 https://doi.org/10.1115/1.3262070
- Tourlidakis. A. & Elder. R. L., 1991, 'Computations of three-dimensional viscous turbulent flow in centrifugal compressors with tip leakage,' IMechE C423/050, pp. 123-141
- Sato, K. & He, L, 2002, 'A Numerical Study on Performances of Centrifugal Compressor Stages with Different Radial Gaps,' ASME Paper No. 2000-GT-462
- Eum, H. J., Kang, Y. S. & Kang, S. H., 2004, 'Tip Clearance Effect on Through - Flow and Performance of a Centrifugal Compressor,' KSME International Journal, Vol. 18, No. 6, pp. 979-989
- Rodgers. C., 1991, 'Centrifugal Compressor Inlet Guide Vanes for Increased Surge Margin,' ASME Journal of Turbomachinery, Oct., Vol. 113, pp. 696-702 https://doi.org/10.1115/1.2929136
- Masahiro Ishida, Daisaku Sakaguchi & Hironobu Ueki, 2001, 'Suppression of Rotating Stall by Wall Roughness Control in Vaneless Diffusers of Centrifugal Blowers,' ASME Journal of Turbomachinery, Vol. 123, pp. 64-72 https://doi.org/10.1115/1.1328084
- Brasz, J. J., 1988, 'Investigation into the Effect of Tip Clearance on Centrifugal Compressor Performance,' ASME Paper No. 88-GT-190
- Davidson, D. P., DeRose, R. D. & Wennerstrom, A. J., 1983, 'The Measurement of Turbomachinery Stator to Drum Running Clearance,' ASME Paper No. 83-GT-204
- Sheard, A. G. & Turner, S. R, 1992, 'Electromechanical Measurement of Turbomachinery Blade Tip-to-Casing Running Clearance,' ASME Paper No. 92-GT-50
- Sheard, A., G., Westerman, G. C., Killeen, B. & Fitzpatrick, M., 1994, 'A High- Speed Capacitance-Based System for Gaging Turbomachinery Blading Radius During the Tip Grind Process,' ASME Journal of Engineering for Gas Turbines and Power, Jan., Vol. 116, pp, 243-249 https://doi.org/10.1115/1.2906800
- Sheard, A., G. & Killeen, B., 1995, 'A Blade-by-Blade Tip Clearance Measurement System for Gas Turbine Applications,' ASME Journal of Engineering for Gas Turbines and Power, Apr., Vol. 117, pp. 326-331 https://doi.org/10.1115/1.2814098
- Mattern, D., Jaw, L., Henry, M. & Fagan, Bob., 1997, 'Experimental Results of an Active Tip Clearance Control System for a Centrifugal Compressor,' ASME Paper No. 97-GT-32
- 임병준, 차봉준, 양수석, 2003, '100kW급 보조동력장치용 압축기 성능시험,' 유체기계저널, 제6권, 제4호, pp. 98-102 https://doi.org/10.5293/KFMA.2003.6.4.098
- Kang, J. S., Cho, S. K., and Kang, S. H., 2002, 'Development of Performance Prediction Method for Centrifugal Compressor Channel Diffusers,' KSME International Journal, Vol. 16, No. 8, pp. 1144-1153
- 강정식, 강신형, 2002, '베인없는 디퓨저에서의 스톨 임계유동각에 관한 연구,' 제2회 한국유체공학학술대회 논문집, 8월, pp. 611-614
- Kang, J. S. and Kang, S. H., 2004, 'Steady and Unsteady Flow Phenomena in a Channel Diffuser of a Centrifugal Compressor,' JSME International Journal (Series B), Fluids and Thermal Engineering, Vol. 47, No. 1, Feb., pp. 91-100 https://doi.org/10.1299/jsmeb.47.91
- 강정식, 강신형, 2001, '원심압축기 채널디퓨저 내부의 압력분포에 관한 연구,' 대한기계학회논문집 B권, 제25권, 제4호, pp. 507-513