The High-speed Operation of Single Phase Switched Reluctance Motor

단상 SRM의 고속 구동 제어에 관한 연구

  • 안준선 (한양대 전기공학과) ;
  • 이주 (한양대 공대 전자전기공학부)
  • Published : 2005.10.01

Abstract

In this paper PU control scheme is presented. The proposed scheme has following features. The one is oft-starting method which is used for preventing to flow large current in motor phase winding when motor starts. The ther is the selection of the level of the over current. The first feature is implemented by increasing the PWM duty lowly, the second feature is implemented by limiting the magnitude of the phase current level by which the over heat f motor by copper losses and magnetic saturation decreases. By the analysis using FEM considering load condition, the peed of mode transition from PW to single pulse control is selected and confirmed by simulation that there is no ver current occurs during the mode transition. For the verification of proposed scheme, the simulation using MATLAB Simulink with considering non-linearity of inductance profile from FEM analysis is performed and the experiment with SRM drive system which has the DSP controller and single Phase SRM are peformed.

Keywords

References

  1. 회전기, 다양화의 동향, 일본 전기학회, Vol.115-D, No. 7, 1995
  2. 릴럭턴스 모터 조사전문위원회, '스위치드 릴럭턴스 모터의 기술 동향,' 대한전기학회, 1994
  3. N.N.Fulton, P.J.Lawrenson, J.M.Stephenson, R.J.Blake, R.M.Davis and W.F.Ray, 'Recent Developments in high Performance Switched Reluctance Drives,' Second International Conference on Electrical Machines-Design and applications, pp, 130-133, Sep., 1985
  4. T. J. E. Miller, 'Switched Reluctance Motors and their control,' Hillsboro, OH: Magna Physics Publishing and London: Oxford University Press, 1993
  5. T. J. E. Miller, 'Electric Control of Switched Reluctance Machines,' Jordan Hill, Oxford: Reed Educational and Professional Publishing Ltd: A division of Reed Educational, 2001
  6. T. J. E. Miller, 'Converter Volt-Ampere Requirements of the Switched Reluctance Motor Drive,' IEEE Trans. Indu. Appl., Vol. IA-21, No.5, pp. 1136-1144, Sep./Oct., 1985 https://doi.org/10.1109/TIA.1985.349516
  7. 김윤현, '토크 리플 저감을 위한 SRM 최적설계 및 직접 토크 제어,' 박사학위 논문, 한양대학교 대학원, 2001
  8. 안진우, 스위치드 릴럭턴스 전동기, 오성미디어, 2001
  9. 박재범, '반응표면법과 유한요소법을 이용한 단상 스위치드 릴럭턴스 전동기의 최적설계,' 석사학위 논문, 한양대학교 대학원, 2005
  10. 김태형, 'FRM의 새로운 설계 기법 및 PWM구동시제특성 해석,' 박사학위 논문, 한양대학교 대학원, 2005
  11. K. Yamazaki, 'Harmonic copper and iron losses calculation of induction motor using nonlinear time-stepping finite element method,' International conference IEMDC 2001, 2001 https://doi.org/10.1109/IEMDC.2001.939364
  12. 최재학, '반응표면 모델링을 이용한 전기 장치의 근사최적설계 연구,' 박사학위 논문, 한양대학교 대학원, 2005
  13. 김용수, MATLAB 입문과 활용, 높이깊이, 2002
  14. R. Krishnan, 'Switched Reluctance Motor Drives (Modeling, Simulation, Analysis Design and Applications),' CRC press, 2001