References
- M. Knoerr, 1996, Fatigue failure of cold forging tooling : causes and possible solutions through fatigue analysis, JMPT. Vol.46, pp. 57-71
- M.J.Liou, H.S. Hasiano, 1989, Prediction of die wear in high speed hot upset forging, ERC/NSM Report, No.99, pp. 33-39
- J. H. Kang, 1999, A study on a die wear model considering thermal softening: (I) construction of the wear model, JMPT, Vol.96, pp. 53-58 https://doi.org/10.1016/S0924-0136(99)00103-X
- J. H. Kang, 1999, A study on a die wear model considering thermal softening: (II) Application of the suggested wear model, JMPT, Vol. 94, pp. 183-188 https://doi.org/10.1016/S0924-0136(99)00104-1
- S. Shaljaskow, 2001, Tool lubricating systems in warm forging, JMPT, Vol. 113, pp. 16-21 https://doi.org/10.1016/S0924-0136(01)00645-8
- Schey, 1983, Tribology in Metalworking - friction, lubrication and wear, American society metals
- D. J. Jeong, B. M, Kim, 2001, Effects of surface treatments and lubricants for warm forging die life, JMPT, Vol. 113, pp. 544-550 https://doi.org/10.1016/S0924-0136(01)00693-8
- S. Sen, B. Aksakal, 2000, Transient and residual thermal stresses in quenched cylindrical bodies, Inter. J. Mech. Sci., Vol.42, pp. 2013-2029 https://doi.org/10.1016/S0020-7403(99)00063-6
- 진민호, 강성수, 2004, 냉 간단조용 SCM420 강의 퀜칭 시 열전달 예측모델 개발, 한국소성가공학회지, Vol.13, No.5. pp. 441-448
- J. U. Jang, 2002, FE Program development for predicting thermal deformation in heat treatment, JMPT, Vol.130, pp. 546-550 https://doi.org/10.1016/S0924-0136(02)00802-6
Cited by
- Numerical Evaluation of Backward Extrusion and Head Nosing for Producing a 6.75L Small Seamless AA6061 Liner vol.22, pp.4, 2013, https://doi.org/10.5228/KSTP.2013.22.4.204