Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

The Development of an Automation Jig for the Vent Grille Assembly Process

벤트 그릴 조립공정 자동화를 위한 자동화지그 개발

  • 김진우 (한양대학교 메커트로닉스공학과) ;
  • 박범석 (한양대 정밀기계공학과) ;
  • 한창수 (한양대 기계정보경영공학부)
  • Published : 2005.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, an automation assembly jig for the automation assembly process for the ventilation grille that is used in the interior of a car Is developed. As the method that can do the automation assembly for the ventilation grille, a simple jig and air cylinder have been applied. And a solenoid valve, a filter regulator, and on-off switch have been used in controlling the system. Moreover, the timer is attached to the equipment so that a worker may control the assembly time, as fitting the quantity on demand of production. Actually with executing the assembly test productivity and performance of assembly have been verified. In case of the automation assembly work for a ventilation grille is compared to the manual work. The optimum working speed has been identified to make the process twice or three times better.

Keywords

References

  1. Arthur, G. E., 1984, 'Advanced Mechanism Design Analysis and Synthesis,' Third Edition, pp. 21-116
  2. George H. M., 1982, 'Kinematics and Dynamics of Machines.'
  3. Nicholas P. C., 1991, 'Mechanisms & Mechanical Devices Sourcebook,' pp. 67-94
  4. Sim, H. J., 1997, 'A Study for the Development of an Intelligent Robot Hand for the Automation in the Steel Frame Construction,' pp. 8-35
  5. Choi, K. L., 1998, 'A Study for the Analysis and Fabrication of Serial-Parallel Type of Hybrid Robot,' pp. 4-42
  6. Choi, K. Y., 1997, 'A study on the Development of an Automatic Fine Polishing System in the Penumatic System,' pp. 10-33
  7. Kang, I. G., 1996, 'A Study on the Indexing Table by the Penumatic Actuating,' pp. 11-45
  8. Park, H. C., 1998, 'A Study on the Behaviour Analysis for Processing Parameters in the Optimum Fine Polishing System,' pp. 8-32
  9. Park, G. M., Jang, J. H., Han, C. S., 1994, 'Development of the Automatic Fine Polishing System,' Proceedings of the Korean Society of Precision Engineering Conference