International Journal of Precision Engineering and Manufacturing

  • 제6권4호
  • /
  • Pages.31-36
  • /
  • 2005
  • /
  • 2234-7593(pISSN)
  • /
  • 2005-4602(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

Die design system for deep drawing and ironing of high pressure gas cylinder

  • 발행 : 2005.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper describes a research work on the die design for the deep drawing & ironing(D. D. I) of high pressure gas cylinder. D. D. I die set is large-sized die used in horizontal press, which is usually composed of a drawing, and an ironing die. Design method of D. D. I die set is very different from that of conventional cold forging die set. Outer diameter of the die set is fixed because of press specification and that of the insert should be as small as possible for saving material cost. In this study, D. D. I die set has been designed to consider those characteristics, and the feasibility of the designed die has been verified by FE-analysis. In addition, the automated system of die design has been developed in AutoCAD R14 by formulating the applied methods to the regular rules.

키워드

참고문헌

  1. Yoon, J. H., Jung, S. Y., Choi, Y., Kim, C., Choi, J. C., 'A Study on the Development of Computer-Aided Process Planning System for the Deep Drawing&Ironing of High Pressure Gas Cylinder,' Journal of the Korean Society of Precision Engineering, Vol. 19, No. 2, pp. 177-186, 2002
  2. Brochure of Fielding Co. Ltd, UK, 1998
  3. Kurt, Lange, 'HANDBOOK OF METAL FORM-ING,' pp. 15.86-15.88, 1985
  4. Kurt, Lange, 'Production of steel parts by cold forging,' ICFG, pp. 1-8, 1978
  5. Yeo, H. T., 'Study on the Design and Analysis of Precision Cold forging Dies with Stress Rings, ' Dong Eui University, pp. 67-76, 2003
  6. Adler, G. and Walter, K., 'Berechnung von einfachen und mehrfachen Pre$\beta$passungen,' INDUSTRIE ANZEIGER, pp. 21-25, 1967
  7. Yeo, H. T., Choi, Y., Hur, K. D., 'ANALYSIS AND DESIGN OF THE PRESTRESSED COLD EXTRUSION DIES BY FEM,' Proc. of AFDM '99, Pusan, Korea September 7-9, pp. 431-436, 1999
  8. 澤辺弘, '冷間鍛造の基礎と應用,' 株式會社産報, pp. 134-161, 1968
  9. National Machinery, 'Tool Design and Part Shape Development for Multi-die Cold Forming'
  10. Kim, S. H., Han, Y. H., Lee, S. H., 'Die Design. Handbook,' TaeKwang, pp. 247-366, 1992
  11. Brochure of NK Co. Ltd, 'Pressure Vessels,' pp . 8-9