Measured Return Loss and Predicted Interference Level of PCB Integrated Filtering Antenna at Millimeter-Wave

  • Lee Jae-Wook (School of Electronics, Telecommunication and Computer Engineering, Hankuk Aviation University) ;
  • Kim Bong-Soo (Electronics and Telecommunications Research Institute(ETRI)) ;
  • Song Myung-Sun (Electronics and Telecommunications Research Institute(ETRI))
  • Published : 2005.09.01

Abstract

In this paper, an experimental investigation for return loss and a software-based prediction for interference level of single-packaged filtering antenna composed of dielectric waveguide filter and PCB(Printed Circuit Board) slot antenna in transceiver module have been carried out with several different feeding structures in millimeter-wave regime. The implementation and embedding method of the existing air-filled waveguide filters working at millimeter-wave frequency on general PCB substrate have been described. In a view of the implementation of each components, the dielectric waveguide embedded in PCB and LTCC(Low Temparature Co-fired Ceramic) substrates has employed the via fences as a replacement with side walls and common ground plane to prevent energy leakage. The characteristics of several prototypes of filtering antenna embedded in PCB substrate are considered by comparing the wideband and transmission characteristics as a function of bent angle of transmission line connecting two components. In addition, as an essential to the packaging of transceiver module working at millimeter-wave, miniaturization technology maintaining the performances of independent components and the important problems caused by integrating and connecting the different components in different layers are described in this paper.

Keywords

References

  1. Bong S. Kim, Jae W. Lee, Kwang S. Kim, and Myung S. Song, 'PCB substrate integrated waveguide-filter using via fences at millimeter-wave', 2004 IEEE MTT-S Int. Microwave Symp. Dig., pp. 1097-1100, Jun. 2004
  2. Jae W. Lee, Bong S. Kim, Kwang S. Kim, Ki C. Eun, and Myung S. Song, 'A comparison between PCB substrate integrated antenna and LTCC antenna at millimeter-wave', Proceedings of the IASTED International Conference on Antennas, Radar, and Wave Propagation (ARP)-2004, Banff, Canada, pp. 78-81, Jul. 2004
  3. M. Ito, K. Maruhashi, K. Ikuina, T. Hashiguchi, and S. Iwanaga, 'A 60-GHz-band planar dielectric waveguide filter for flip-chip modules', IEEE Trans. Microwave Theory & Tech., vol. MTT-49, no. 12, pp. 2431-2436, Dec. 2001
  4. Yu Rong, K. A. Zaki, M. Hageman, D. Stevens, and J. Gipprich, 'LTCC wide-band ridge waveguide bandpass filters', IEEE Trans. Microwave Theory & Tech., vol. MTT-47, no. 9, pp. 1836-1840, Sep. 1999
  5. H. Uchimura, T. Takenoshita, and M. Fujii, 'Development of a 'Laminated Waveguide', IEEE Trans. Microwave Theory & Tech., vol. MTT-46, no. 12, pp. 2438-2443, Dec. 1998
  6. B. Froppier, Y. Mahe, E. M. Cruz, and S. Toutain, 'Desing of a filtering antenna: application to the electromagnetic horn', IEEE Int'l Symposium on Antennas and Propagation, 2003
  7. Kwang S. Kim, Bong S. Kim, Jae W. Lee, Ki C. Eun, and Myung S. Song, 'Low loss vertical transition for millimeter-wave LTCC module', International Joint Conference of the 6th Topical Symposium on Millimeter Waves, TSMMW 2004, the 5th MINT Miliimeter-Wave International Symposium, MlNT-MIS2004, pp. 114-117, Feb. 2004
  8. A. Kerkhoff, H. Ling, 'Desing of a planar monopole antennas for use with ultra-wideband(UWB) having a band-notched characteristic', IEEE Int'l Symposium on Antennas and Propagation, 2003
  9. G. L. Matthaei, L. Young, and E. M. T. Jones, Microwave filters, impedance-matching networks, and coupling structures, Artech House, pp. 450-459, 1980
  10. D. Deslandes, K. Wu, 'Integrated microstrip and rectangular waveguide in planar form', IEEE Microwave and Wireless Components Letters, vol. 11, no. 2, pp. 68-70, Feb. 2001 https://doi.org/10.1109/7260.914305
  11. 'CST Microwave Studio, Release 5.0', Tech. Rep., 2004