References
- ABAQUS , 2002, User's Manual, Version 6.2, Hibbitt Karlsson & Sorensen
- Beaney, E. M., 1976, 'Accurate Measurement of Residual Stress on any Steel Using the Center Hole Method,' Strain, Journal BSSM, 12, pp. 99-106 https://doi.org/10.1111/j.1475-1305.1976.tb00194.x
- Beghini, M., Bertini, L. and Raffaelli, P., 1994, 'Numerical Analysis of Plasticity Effects in the Hole-drilling Residual Stress Measurement,' J. of Testing and Evaluation, 22, pp. 522-529 https://doi.org/10.1520/JTE11856J
- Bueckner, H. F., 1958, 'The Propagation of Cracks and the Energy of Elastic Deformation,' Trans. ASME, 80, pp. 1225-1230
- Gibmeier, J., 1998, 'Untersuchung Plastischer Dehnungsanteile bei der Bohrlochmethode-FEM-Modellierung Experimentell Ermittelter Dehnungsverlaufe,' Diplomarbeit, Institut fur Werkstofftechnik, Universitat Gh Kassel
- Kim, S., Shim, Y. L. and Song, J. I., 2002, 'Residual Stress and Fracture Analysis of Thick Plate for Partial Penetration Multi-Pass Weldment,' KSME Int. J., Vol. 16, No. 9, pp. 1033-1039
- 'Measurement of Residual Stresses by the Hole-drilling Strain Gage Method,' Technical Note No. TN-503-4, Vishay-Measurement Group Inc., 1-19, 1993
- Prime, M. B., 2001, 'Cross-Sectional Mapping of Residual Stresses by Measuring the Surface Contour After a Cut,' ASME J. Eng. Materials and Technology, 123, pp. 162-168 https://doi.org/10.1115/1.1345526
- Tada, H. and Paris, P. C., 1983, 'The Stress Intensity Factor for a Crack Perpendicular to the Welding bead,' Int. J. of Fracture, 21, pp. 279-284 https://doi.org/10.1007/BF00942346
- Terada, H., 1976, 'An Analysis of the Stress Intensity Factor of a Crack Perpendicular to the welding Bead,' Engineering Fracture Mechanics, 8, pp. 441-444 https://doi.org/10.1016/0013-7944(76)90024-2
- Tosun, N., 2003, 'The Effect of the Cutting Parameters on Performance of WEDM,' KSME Int. J., Vol. 17, No. 6, pp. 816-824