References
- Choi.J.W., 2005, 'A Study on Relation between Grain Size Refinement and Strength by Equal Channel Angular Pressing (ECAP),' MS Thesis, School of Mechanical Engineering, Chung-Ang University
- Ma. Y. W., Choi. J. W. And Yoon. K. B., 2005, 'Assessment of Strength Characteristics of Al 2024 ECAP Metal Using Small Punch Testing,' Trans. of the KSME (A), submitted
- Kang. H. K., Kim. H. W. And Kang. S. B., 2002, 'Influence of Pressing Temperature on the Microstructure and Mechanical Properties of 6061 Al Alloy Processed by Equal Channel Angular Pressing,' J. of Kor. Inst. of Met & Mater, Vol. 40, No. 2, pp. 168-176
- Kang. H. K., Bachelard. L., Kim. H. W. And Kang. S. B., 2001, 'Microstructure and Mechanical Properties of 5083 Aluminum Alloy Processed by Equal Channel Angular Pressing at Elevated Temperature,' J. of Kor. Inst. of Met & Mater, Vol. 39, No. 5, pp. 553-559
- V. Patlan., K. Higashi., K. Kitagawa., A. Vinogradov. and M. Kawazoe., 2001, 'Cyclic Response of Fine Grain 5056 Al-Mg Alloy Processed by Equal-Channel Angular Pressing,' Material Science and Engineering A319-321, pp. 587-591 https://doi.org/10.1016/S0921-5093(01)01069-3
- Iwahashi. Y., Horita. Z, Nemoto, M. and Langdon. T. G, 1997, 'An Investigation of Microstructural Evolution during Equal-Channel Angular Pressing,' Acta Materialia, Volume 45, Issue 11, pp. 4733-4741 https://doi.org/10.1016/S1359-6454(97)00100-6
- Wang. Y. Y., Sun. P. L., Kao. P. W. and Chang. C. P, 2004, 'Effect of Deformation Temperature on the Microstructure Developed in Commercial Purity Aluminum Processed by Equal Channel Angular Extrusion,' Scripta Materialia, Vol. 50, Issue 5, pp. 613-617 https://doi.org/10.1016/j.scriptamat.2003.11.027
- Fluery. E. and Ha. J. S., 1998, 'Small Punch Tests to Estimate the Mechanical Properties of Steels for Steam Power Plant: I. Mechanical Strength,' International Journal of Pressure Vessels and Piping, Vol. 75, pp. 699-706 https://doi.org/10.1016/S0308-0161(98)00074-X
- FIPCA ISP 13663-1998-02, 'Characterization of Punch and Bulge Testing of Small Specimens Employing Theoretical, Finite Element and Experimental Methods and a Technical Market Survey.'
-
Mao. X. and Takahashi. H., 1987, 'Development of a Further-Miniaturized Specimen of 3mm Diameter for TEM Disk(
${\variphi}$ 3mm) Small Punch Tests, Journal of Nuclear Materials 150, pp.42-52 https://doi.org/10.1016/0022-3115(87)90092-4 - Park. T. G., Ma. Y. W., Jeong. I. S. and Yoon. K. B., 2003, 'A Study on Applicability of SP Creep Testing for Measurement of Creep Properties of Zr-2.5Nb Alloy,' Trans. of the KSME (A), Vol. 27, No. 1, pp. 94-101 https://doi.org/10.3795/KSME-A.2003.27.1.094
- Yoon. K. B., Park. T. G., Shim. S. H. and Jeong. I. S., 2001, 'Assessment of Creep Properties of 9Cr Steel Using Small Punch Creep Testing,' Trans. of the KSME (A), Vol. 25, No. 9, pp. 1493-1500
- Park. T. G., Shim. S. H., Yoon. K. B. and Jang, C. H., 2002, 'A Study on Parameters Measured during Small Punch Creep Testing,' Trans. of the KSME (A), Vol. 26, No. 1, pp. 171-178 https://doi.org/10.3795/KSME-A.2002.26.1.171