참고문헌
- MacDonald, P.E., Shah, Y.N. and Ellison, P.G., 1996, 'Steam Generator Tube Failure,' NUREG/CR-6365, USNRC
- USNRC, 1976, 'Base for Plugging Degraded PWR Steam Generator Tubes,' Regulatory Guide 1.121
- Cochet, B. and Flesh, B., 1987, 'Crack Stability Criteria in Steam Generator Tubes,' 9th International Conference on SMiRT, Vol. D, pp. 413-419
- Yu, Y.J., Kim, J.H., Kim, Y. and Kim Y.J., 1994, 'Development of Steam Generator Tube Plugging Criteria for Axial Cracks,' International Journal of Pressure Vessels and Piping, Vol. 280, pp. 79-83
- Majumdar, S., 1999, 'Failure and Leakage Through Circumferential Cracks in Steam Generator Tubing during Accident Conditions,' International Journal of Pressure Vessels and Piping, Vol. 76, pp. 839-847 https://doi.org/10.1016/S0308-0161(99)00058-7
- Majumdar, S., Kasza, K., Franklin, J. and Muscara, J., 2000, 'Pressure and Leak-Rate Tests and Models for Predicting Failure of Flawed Steam Generator Tubes,' NUREG/CR-6664, USNRC
- Electric Power Research Institute, 1991, 'Steam Generator Tube Integrity Volume 1: Burst Test Results and Validation of Rupture Criteria (Framatome Data),' EPRI NP-6865-L
- Shim, D.J., Huh, N.S., Kim, Y.J. and Kim, Y.J., 2003, 'Plastic Limit Pressure Solutions for Cracked Pipes Using 3-D Finite Element Method,' Trans. Of the Korean Society of Mechanical Engineers, Vol. 27, No. 1, pp. 26-33 https://doi.org/10.3795/KSME-A.2003.27.1.026
- Shim, D.J., Kim, Y.J., Kim, Y.J., Hwang, S.S. and Kim, J.S., 2003, 'Plastic Limit Load Solutions for Circumferential Surface Cracked Cylinders Under Combined Loading,' Trans. Of the Korean Society of Mechanical Engineers, Vol. 27, No. 9, pp. 1469-1476 https://doi.org/10.3795/KSME-A.2003.27.9.1469
- Moon, S.I., Chang, Y.S., Kim, Y.J., Lee, J.H., Song, M.H. and Choi, Y.H., 2004, 'Assessment of Steam Generator Tubes with Multiple Axial Through-Wall Cracks,' Trans. Of the Korean Society of Mechanical Engineers, Vol. 28, No. 11, pp. 1741-1751 https://doi.org/10.3795/KSME-A.2004.28.11.1741
- Moon, S.I., Chang, Y.S., Kim, Y.J., Lee, J.H., Song, M.H., Choi, Y.H. and Hwang, S.S., 2004, 'Evaluation of Plastic Collapse Behavior for Multiple Cracked Structures,' Trans. Of the Korean Society of Mechanical Engineers, Vol. 28, No. 11, pp. 1813-1821 https://doi.org/10.3795/KSME-A.2004.28.11.1813
- Moon, S.I., Chang, Y.S., Kim, Y.J., Lee, J.H., Song, M.H., Choi, Y.H. and Kim, J.S., 2005, 'Development of Optimum Global Failure Prediction Model for Steam Generator Tube with Two Parallel Cracks,' Trans. Of the Korean Society of Mechanical Engineers, Vol. 29, No. 5, pp. 754-761 https://doi.org/10.3795/KSME-A.2005.29.5.754
- Shin, K.I., Park, J.H., Kim, H.D., Chung, H.S. and Choi, Y.H., 2004, 'Experimental and Analytical Study on Burst Pressure of a Steam Generator Tube with a T-type Combination Crack,' Trans. Of the Korean Society of Mechanical Engineers, Vol. 28, No. 2, pp. 158-164 https://doi.org/10.3795/KSME-A.2004.28.2.158
- Shin, K.I., Park, J.H., Jhung, M.J. and Choi, Y.H., 2004, 'Fracture Mechanics Analysis of Steam Generator Tubes after Shot Peening,' Trans. Of the Korean Society of Mechanical Engineers, Vol. 28, No. 6, pp. 732-738 https://doi.org/10.3795/KSME-A.2004.28.6.732
- ASME, 1998, 'Rules for Inservice Inspection of Nuclear Power Plant Components,' Sec.XI, ASME Boiler and Pressure Vessel Committee
- Ainsworth, R.A., 1984, 'The Assessment of Defects in Structures of Strain Hardening Materials,' Engineering Fracture Mechanics, Vol. 19, pp. 633-42 https://doi.org/10.1016/0013-7944(84)90096-1
- British Energy, 2001, 'R6: Assessment of the Integrity of Structures Containing Defects,' Revision 4
- Kanninen, M.F., Zahoor, A., Wilkowski, G., Abou-Sayed, I., Marshall, C., Broek, D., Sampath, S., Rhee, H. and Ahmad, J., 1982, 'Instability Predictions for Circumferentially Cracked Type 304 Stainless Steel Pipes under Dynamic Loading,' EPRI Report NP-2347, Electric Power Research Institute
- Miller, A. G., 'Review of Limit Loads of Structures Containing Defects,' Int. J. Pres. & Piping Vol. 32, pp.197-327 (1988) https://doi.org/10.1016/0308-0161(88)90073-7
- Webster, G.A. and Ainsworth, R.A., 1994, 'High Temperature Component Life Assessment,' Chapman and Hall
- Penny, R.K. and Marriot, D.L., 1995, 'Design for Creep,' Chapman and Hall
- Kim, Y.J, Shim, D.J., Huh, N.S. and Kim, Y.J., 2002, 'Plastic Limit Pressure for Cracked Tubes Using Finite Element Limit Analyses,' International Journal of Pressure Vessels and Piping, Vol. 79, pp. 321-330 https://doi.org/10.1016/S0308-0161(02)00031-5
- Kim, Y.J., Chang, Y.S., Moon, S.I., Kim, C.H. and Song, K.H., 2004, 'Development of Predictive Models for Failure of Flawed Steam Generator Tubes at Realistic Corrosion Environment,' KAERI/CM-778/2004
- ASTM, 2001, 'Standard Test Method for Measurement of Fracture Toughness,' E1820-01
- Mills, W.J., 1981, 'On the Relationship Between Stretch Zone Formation and the J-Integral for High Strain Hardening Materials,' Journal of Testing and Evaluation, Vol. 9, pp. 56-62 https://doi.org/10.1520/JTE10648J