DOI QR코드

DOI QR Code

차체구조부재용 알루미늄 CFRP 혼성사각부재의 축 압궤 특성

Axial Collapse Characteristics of Aluminum CFRP Compound Square Members for Vehicle Structural Members

  • 이길성 (조선대학교 대학원 기계설계공학과) ;
  • 차천석 (순천대학교 기계자동차공학부) ;
  • 편석범 (동강대학 소방안전관리과) ;
  • 양인영 (조선대학교 기계설계공학과) ;
  • 심재기 (조선대학교 기전공학과)
  • 발행 : 2005.10.01

초록

An aluminum or CFRP (Carbon Fiber ReinfDrced Plastics)is representative one of light-weight materials but its axial collapse mechanism is different from each other. The aluminum member absorbs energy by stable plastic deformation, while the CFRP member absorbs energy by unstable brittle failure with higher specific strength and stiffness than those in the aluminum member. In an attempt to achieve a synergy effect by combining the two members, aluminum CFRP compound square members were manufactured, which are composed of aluminum members wrapped with CFRP outside aluminum square members with different fiber orientation angle and thickness of CFRP, and axial collapse tests were performed fur the members. The axial collapse characteristics of the compound members were analyzed and compared with those of the respective aluminum members and CFRP members. Test results showed that the collapse of the aluminum CFRP compound member complemented unstable brittle failure of the CFRP member due to ductile characteristics of the inner aluminum member. The collapse modes were categorized into four modes under the iuluence of the fiber orientation angle and thickness of CFRP. The absorbed energy Per unit mass, which is in the light-weight aspect was higher in the aluminum CFRP compound member than that in the aluminum member and the CFRP member alone.

키워드

참고문헌

  1. White, M. D. and Jones, N., 1999, 'Experimental Quasi-Static Axial Crushing of Top-Hat and Double-Hat Thin-Walled Sections,' International Journal of Mechanical Science, Vol. 41, pp. 179-208 https://doi.org/10.1016/S0020-7403(98)00047-2
  2. White, M. D., Jones, N. and Abramowicz, W., 1999, 'A Theoretical Analysis for the Quasi-Static Axial Crushing of Top-Hat and Double-Hat Thin-Walled Sections,' International Journal of Mechanical Sciences, Vol. 41, pp. 209-233 https://doi.org/10.1016/S0020-7403(98)00048-4
  3. Cha, C. S., Chung, J. O., Park, J. W., Kim, Y. N. and Yang, I.Y., 2003, 'Collapse Analysis of Spot Welded Thin Section Members in a Vehicle Body Structure at Various Impact Velocities,' KSME International Journal, Vol. 17, No. 4, pp. 501-510
  4. Cha, C. S., Kang, J. Y. and Yang, I. Y., 2001, 'Axial Impact Collapse Analysis of Spot Welded Hat Shaped Section Members,' KSME International Journal, Vol. 15, No. 2, pp. 180-191
  5. Cha, C. S., Kim, Y. N., Kim, S. K., Im, K. H. and Yang, I. Y., 2002, 'Axial Impact Collapse Analysis of Spot Welded Hat and Double-Hat Shaped Section Members Using an Explicit Finite Element Code,' KSME International Journal, Vol. 16, No. 1, pp. 32-38
  6. Kim, S. K., Im, K. H., Kim, Y. N., Park, J. W., Yang, I. Y.and Adachi, T., 2003, 'On the Characteristics of Energy Absorption Control in Thin-Walled Members for the Use of Vehicular Structures,' Key Engineering Materials, Vols. 233-236, pp. 239-244 https://doi.org/10.4028/www.scientific.net/KEM.233-236.239
  7. Li, S. and Reid, S. R., 1990, 'Relationship Betweenthe Elastic Bucking of Square Tubes and Rectangular Plates,' International Journal of Applied Mechanics, Vol. 57, pp. 969-973 https://doi.org/10.1115/1.2897669
  8. Minoru, Y., Manabu, G. and Yasuhiko S., 2003, 'Axial Crush of Hollow Cylindrical Structures with Various Polygonal Cross-Sections Numerical Simulation and Experiment,' Journal of Materials Processing Technology, Vol. 140, pp. 59-64 https://doi.org/10.1016/S0924-0136(03)00821-5
  9. Singace, A. A., 1999, 'Axial Crushing Analysis of Tubes Deforming in the Multi-Mode,' International Journal of Mechanical Science, Vol. 41, pp. 865-890 https://doi.org/10.1016/S0020-7403(98)00052-6
  10. Avalle, M. and Belingardi, G., 1997, 'Experimental Evaluation of the Strain Field History During Plastic Progressive Folding of Aluminum Circular Tubes,' International Journal of Mechanical Science, Vol. 39, No.5, pp. 575-583 https://doi.org/10.1016/S0020-7403(96)00063-X
  11. Mamalis, A. G., Manolakos, D. E., Ioannidis, M. B. and Papapostolou, D. P., 2004, 'Crashworthy Characteristics of Axially Statically Compressed Thin-Walled Square CFRP Composite Tubes: Experimental,' Composite Structures, Vol. 63, pp. 347-360 https://doi.org/10.1016/S0263-8223(03)00183-1
  12. Kim, Y. N., Cha, C. S. and Yang, I. Y., 2002, 'The Experimental Study on the Collapse Mechanism of CFRP Composite Tubes,' Transactions of the KSAE, Vol. 10, No. 4, pp. 149-157
  13. Farley, G. L., 1992, 'Relationship Between Mechanical-Property And Energy-Absorption Trends for Composite Tubes,' NASA Technical paper, OMB No. 0704-0188
  14. Kim, Y. N., Im, K. H., Kim, S. K. and Yang, I. Y., 2003, 'Energy Absorption Characteristics of CFRP Composite Tubes Under Axial Compression Load,' Key Engineering Materials, Vols. 233-236, pp. 245-250 https://doi.org/10.4028/www.scientific.net/KEM.233-236.245
  15. Kim, Y. N., Hwang, J. J., Baek, K. Y., Cha, C. S. and Yang, I. Y., 2003, 'Impact Collapse Characteristics of CF/Epoxy Composite Tubes for Light-Weights,' KSME International Journal, Vol. 17, No. 1, pp. 48-56