참고문헌
- Al-Hassani, S. T. S., Duncan, J. L. and Johnson, W. (1974). On the parameters of the magnetic forming process. Journal Mechanical Engineering Science, 16, 1-9 https://doi.org/10.1243/JMES_JOUR_1974_016_003_02
- Barnes, T. A. and Pashby, I. R. (2000). Joining techniques for aluminum spaceframe used in automobiles Part I - solid and liquid phase welding. J. Materials Processing Technology, 99, 62-71 https://doi.org/10.1016/S0924-0136(99)00367-2
- Barnes, T. A. and Pashby, I. R. (2000). Joining techniques for aluminum spaceframe used in automobiles Part II - adhesive bonding and mechanical fasteners. J. Materials Processing Technology, 99, 72-79 https://doi.org/10.1016/S0924-0136(99)00361-1
- Beerwald, C., Brosius, A., Homberg, W., Kleiner, M. and Wellendorf, A. (1999). New aspects of electromagnetic forming. Advanced Technology of Plasticity. Proc. of the 6th ICTP 3, 2471-2476
- Beley, I. V., Ferrtik, S. M. and Khimenko, L. T. (1996). Electromagnetic forming handbook. English Version of Russian book translated by M. M. Altynova, Ohio State University
- Chunfeng, L., Zhiheng, Z., Jianhui, L., Yongzhi, W. and Yuying, Y. (2002). Numerical simulation of the magnetic pressure in tube electromagnetic bulging. J. Materials Processing Technology, 123, 225-228 https://doi.org/10.1016/S0924-0136(02)00063-8
- Hashimoto, N., Wang, X. and Negishi, H. (1993). Electromagnetic forming of thin-walled metal tube with fine grooves, Advanced Technology of plasticity. Proc. the Fourth International Conference on Technology of Plasticity, 533-538
- Kim, H. Y., Kim, J. K., Heo, S. J. and Kang, H. (2002). Design of the impact energy absorbing members and evaluation of the crashworthiness for aluminum intensive vehicle. Trans. Korean Society of Automotive Engineers 10, 1, 216-233
- Hwang, W. S., Lee, J. S., Kim, N. H. and Sohn, H. S. (1993). Joining of copper tube to polyurethane tube by electromagnetic pulse forming. J. Materials Processing Technology, 37, 83-93 https://doi.org/10.1016/0924-0136(93)90082-H
- Jablonski, J. and Winkler, R. (1978). Analysis of the electromagnetic forming process. Int. J. Mech. Sci., 20, 315-325 https://doi.org/10.1016/0020-7403(78)90093-0
- Lal, G. K. and Hillier, M. J. (1968). The electrodynamics of electromagnetic forming. Int. J. Mech. Sci., 10, 491-500 https://doi.org/10.1016/0020-7403(68)90030-1
- Lee, S. H. and Lee, D. N. (1994). Finite element analysis for electromagnetic forming for tube compression, Trans. of ASME. J. Engineering Material and Technology 116, 2 https://doi.org/10.1115/1.2904256
- Lianzhong, Y., Bingqin, Z., Shihong, Z. and Haizhi, X. (1993). The deformation and strain distribution of metal frame parts in electromagnetic forming, Advanced Technology of Plasticity. Proc. the 4th ICTP 1867-1870
- Mahanian, S. and Blackwell, D. B. (1996). Finite element analysis of electromagnetic forming of tubes with fittings. MED-Manufacturing Science and Engineering, 4, 323-329
- Min, D. K. and Kim, D. W. (1993). Finite element analysis of the electromagnetic tube-compression process. J. Materials Processing Technology 38, 1-2, 29-40 https://doi.org/10.1016/0924-0136(93)90181-5
- Murakoshi, Y., Takahashi, M., Sano, T., Hanada, K. and Negishi, H. (1998). Inside bead forming of aluminum tube by electo-magnetic forming. J. Materials Processing Technology 80-81,695-699 https://doi.org/10.1016/S0924-0136(98)00217-9
- Padmanabhan, M. (1997). Wrinkling and Springback in Electromagnetic Sheet Metal Forming and Electro- Magnetic Ring Compression, Ph.D. Dissertation, Ohio State University
- Panshikar, H. M. (2000). Electromagnetic Forming and Impact Welding, Ph.D. Dissertation, Ohio State University
- Song, J. H., Noh, H. G., Akira, S. M., Yu, H. S., Kang, H. Y. and Yang, S. M. (2004). Analysis of effective nugget size by infrared thermography in spot weldment. Int. J. Automotive Engineers 5, 1, 55-59
- Wu, Han-Chin, Xu, Zhiyou and Wand, Paul T. (1998). Torsion test of aluminum in the large strain range. J. Material Plasticity 13, 10, 873-892
- Zhang, H., Murata, M. and Suzuki, H. (1995). Effects of various working conditions on tube bulging by electromagnetic forming. J. Materials Processing Technology, 48, 113-121 https://doi.org/10.1016/0924-0136(94)01640-M
- Zhang, S. B. and Neghishi, H. (2001). Curling of square tube by electromagnetic forming. Impact Engineering and Application, 285-290