소성∙가공 (Transactions of Materials Processing)

  • 제14권5호
  • /
  • Pages.417-422
  • /
  • 2005
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

비정질 합금의 성형기술

Forming Technology of Metallic Glasses

  • 김택수 (한국생산기술연구원 벌크비정질 및 나노소재개발사업단) ;
  • 이진규 (한국생산기술연구원 벌크비정질 및 나노소재개발사업단) ;
  • 김휘준 (한국생산기술연구원 벌크비정질 및 나노소재개발사업단) ;
  • 배정찬 (한국생산기술연구원 벌크비정질 및 나노소재개발사업단)
  • 발행 : 2005.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. W. Clement, R.H. Willens, P. Duwez. 1960, Non-Crystalline Structure in Solidified Gold-Silicon Alloys, Nature 187, pp. 869-870
  2. S. Kavesh, in: J.J. Gillman, H. L. Leamy (Eds.), Principles of Fabrication, Metallic Glasses, ASM International, Metals Park, OH, 1978 (Chapter 2)
  3. S. Chen. 1974, Thermodynamic Considerations on the Formation and Stability of Metallic Glasses, Acta Metall. 22, pp. 1505-1511 https://doi.org/10.1016/0001-6160(74)90112-6
  4. W. H. Kui, A. L. Greer, D. Turnbull. 1984, Formation of Bulk Metallic Glass by Fluxing, Appl. Phys. Lett. 45, pp. 615-616 https://doi.org/10.1063/1.95330
  5. A. Inoue, T. Nakamura, N. Nishiyama, T. Masumoto, 1992, Mg-Cu-Y Bulk Amorphous Alloys with High Tensile Strength Produced by a High-Pressure Die Casting Method, Mater. Trans. JIM 33, pp. 937-945 https://doi.org/10.2320/matertrans1989.33.937
  6. 배정찬, 김휘준, 이진규, 김택수, 2004, 차세대 신기술개발사업 고성현성 중간재기술개발 보고서, 산업자원부
  7. G. Shao, 2003, Thermodynamic and Kinetic Aspects of Intermetallic Amorphous Alloys, Intermetallics, vol.11, pp. 313-324 https://doi.org/10.1016/S0966-9795(02)00248-0
  8. A. Inoue, 2000, Stabilization of Metallic Supercooled Liquid and Bulk Amorphous Alloys, Acta. Mater, Vol.48, pp. 279-306 https://doi.org/10.1016/S1359-6454(99)00300-6
  9. R. D.Conner, R. B. Dandliker, V. Scruggs, W. L. Johnson, 2000, Dynamic Deformation Behavior of Tungsten-Fiber/ Metallic-Glass Matrix Composites, International J. Impact Eng., Vol.24, pp. 435-444 https://doi.org/10.1016/S0734-743X(99)00176-1
  10. B. Clausen, S.-Y.Lee, E.Ustundag, C.C.Aydiner, R.D. Conner, M.A.M, Bourke, 2003, Compressive Yielding of Tungsten Reinforced Bulk Metallic Glass Composites, Scripta Mater., Vol.49, pp. 123-128 https://doi.org/10.1016/S1359-6462(03)00237-9
  11. D. J. Sordelet, E. Rozhkova, P. Huang, M.C-Dahlborg, 2002, Synthesis of $CU_{47}Ti_{34}Zr_{11}Ni_8$ Bulk Metallic Glass by Warm Extrusion of Gas Atomized Powders, J. Mater. Res., Vol.17, pp. 186-198 https://doi.org/10.1557/JMR.2002.0028

피인용 문헌

  1. Study on the fabrication and physical properties of cold-sprayed, Cu-based amorphous coating vol.144, 2009, https://doi.org/10.1088/1742-6596/144/1/012113