References
- J. M. Bae and Y. S. Yoo, 'Technical Trend of Fuel Cell System,' Ceramist, 6 [4] 19-31 (2003)
- K. S. Lee, D. W. Seo, J. H. Yu, and S. K. Woo, 'A Study on the Improvement of Strength in NiO-YSZ Porous Anode Material for Solid Oxide Fuel Cell(in Korean),' J. Kor. Ceram. Soc., 40 [3] 241-48 (2003) https://doi.org/10.4191/KCERS.2003.40.3.241
- H. H. Jung, D. J. Kim, J. S. Han, and D. Y. Lee, 'Mechanical Properties of (Y,Nb)-TZP/Alumina Composites for Dental Implant Abutments(in Korean),' J. Kor. Ceram. Soc., 41 [7] 508-12 (2004) https://doi.org/10.4191/KCERS.2004.41.7.508
- W. Beele, G Marinjinissen, and A. van Lieshout, 'The Evolution of Thermal Barrier Coatings-Status and Upcoming Solutions for Today's Key Issues,' Surf. Coat. Tech., 120-121 61-7 (1999) https://doi.org/10.1016/S0257-8972(99)00342-4
- M. Asmani, C. Kermel, A. Leriche, and M. Ourak, 'Influence of Porosity on Young's Modulus and Poisson's Ratio in Alumina Ceramics,' J. Eur. Ceram. Soc., 21 1081-86 (2001) https://doi.org/10.1016/S0955-2219(00)00314-9
- M. Jeandin, S. Rupp, J. Massol, and Y. Biennenu, 'Structural Study and Image Analysis of Rapidly Cooled Supersolidus-Sintered Astroloy,' Mater. Sci. and Eng., 77 139-47 (1986) https://doi.org/10.1016/0025-5416(86)90362-9
-
Y. S. Han and J. K. Park, 'Preparation of Porous Silica Support and
$TiO_{2}$ Coating by Sol-Gel Method(in Korean),' J. Kor, Ceram. Soc., 41 [7] 548-54 (2004) https://doi.org/10.4191/KCERS.2004.41.7.548 - F. B. Abudaia, J. T. Evans, and B. A. Shaw, 'Spherical Indentation Fatigue Cracking,' Mater. Sci. and Eng., A391 181-87 (2005)
- K. S. Lee, S. K. Lee, and D. K. Kim, 'A Study on the Coating Fracture in Silicon Nitride Bilayer : I. Effect of Elastic/Plastic Mismatch(in Korean),' J. Kor. Ceram. Soc., 34 [12] 1268-74 (1997)
- K. S. Lee, S. K. Lee, and D. K. Kim, 'A Study on the Coating Fracture in Silicon Nitride Bilayer : II. Effect of Coating Thickness(in Korean),' J. Kor. Ceram. Soc., 35 [1] 48-54 (1997)
- B. R. Lawn, 'Indentation of Ceramic with Spheres: A Century After Hertz,' J. Am. Ceram. Soc., 81 [8] 1977-94 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02580.x
- P. Miranda, A. Pajares, F. Guiberteau, F. L. Cumbrera, and B. R. Lawn, 'Role of Flaw Statistics in Contact Fracture of Brittle Coatings,' Acta. Mater., 49 3719-26 (2001) https://doi.org/10.1016/S1359-6454(01)00280-4
- J. H. Ha, J. H. Kim, and D. K. Kim, 'Elasticity and Thermal Conductivity of Porous Ceramics with Controlled Pore Structure,' J. Jpn. Ceram. Soc., 112 [5] 1084-88 (2004)
- H. Chai, B. R. Lawn, and S. Wuttiphan, 'Fracture Modes in Brittle Coatings with Large Interlayer Modulus Mismatch,' J. Mater. Res., 14 [9] 3805-17 (1999) https://doi.org/10.1557/JMR.1999.0514
- J. H. Kim, P. Miranda, D. K. Kim, and B. R. Lawn, 'Effect of an Adhesive Interlayer on the Fracture of a Brittle Coating on a Supporting Substrate,' J. Mater. Res., 18 [1] 222-27 (2003) https://doi.org/10.1557/JMR.2003.0031
-
S. K. Kim, T. W. Kim, C. Kim, T. H. Shin, J. S. Han, S. K. Woo, and K. S. Lee, 'Indentation of YSZ/
$Al_{2}O_{3}$ Layered Systems Prepared by Nano-Coating(in Korean),' J. Kor. Ceram. Soc., 42 [1] 43-9 (2005) https://doi.org/10.4191/KCERS.2005.42.1.043 - K. S. Lee, S. Wuttiphan, X. Z. Hu, S. K. Lee, and B. R. Lawn, 'Contact-Induced Transverse Fractures in Brittle Layers on Soft Sunstrates : A Study on Silicon Nitride Bilayers,' J. Am. Ceram. Soc., 81 [3] 571-80 (1998) https://doi.org/10.1111/j.1151-2916.1998.tb02376.x
Cited by
- Fracture analysis for ceramic disk with semi-elliptical crack and pore vol.15, pp.3, 2014, https://doi.org/10.1007/s12541-014-0354-5