Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지

The Effects of Welding Length on the Angular Distortion

용접각변형에 미치는 용접길이의 영향

  • Published : 2005.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

To estimate welding deformation for large steel structures, either experiment result with small specimen or analysis result of FEM with small numerical model is used. Consequently, it is important to decide the welding length of specimen and numerical model not to have an effect on welding deformation for accurate estimation of whole welding deformation. This study experimentally clarifies the effect of welding length on angular distortion due to welding by varying welding length of specimens, but fixing width and thickness of specimens on V-groove butt welding, fillet welding and bead on plate welding. As a resell the critical welding length on fillet welding and on bead on plate welding is over 500mm and on V-groove butt welding is over 1,000mm.

Keywords

References

  1. T. Nomoto, S. Takechi, and K. Aoyama, 'Basic Studies on Accuracy Management System Based on Estimating of Weld Deformations', Journal of the Society of Naval Architects of Japan, 181-4(1997), 249-260
  2. H. Murakawa, Y. Luo, and Y. Ueda, 'Prediction of Welding Deformationand Residual Stress by Elastic FEM Based on Inherent Strain (First Report) Mechanism of Inherent Strain Production'. Journal of the Society of Naval Architects of Japan, Vol. 180 (1996), 739-751
  3. H. Murakawa, Y. Luo, and Y. Ueda, 'Prediction of Welding Deformation and Residual Stress by Elastic FEM Based on Inherent Strain (Second Report) Deformation and Residual Stress under Multiple Thermal Cycles', Journal of the Society of Naval Architects of Japan, Vol. 182(1997), 873-793
  4. H. Murakawa, Y. Luo, and Y. Veda, 'Prediction of Welding Deformation and Residual Stress by Elastic FEM Based on Inherent Strain (Third Report) Deformation and Residual Stress in Narrow Gap Welding', Journal of the Society of Naval Architects of Japan, Vol. 183(1998), 323-333
  5. S.I. Seo, C.D. Jang, 'A Study on the Prediction of Deformations of Welded Ship Structures', Journal of Ship Production, Vol. 15, No.2(1999), 73-81
  6. T. Terasaki : 構造用材料の溶接殘留應力溶接變形におよぼす溶接諸條件の影響に關する硏究, 大阪大學博士論文, 53-54, 1976 (in Japanese)
  7. I.Tsuji, K. Ogawa: An Analysis on Transient Stress and Deformation of a Steel Strip Subjected to Local Heating, Quarterly Journal of Japanese Welding Society, 45-1(1976), 36-41 https://doi.org/10.2207/qjjws1943.45.36