참고문헌
- K. Easterling : Introduction to the physical metallurgy of Welding, Butterworths, (1983), 104
- Stephen Liu, Fang Chun Liao : Mat Sci & Eng A244 (1998) 273-283
- Sangho UHM, Joonoh MOON, Changheel LEE, Jihyun YOON and Bongsang LEE : ISIJ Int, 44-7(2004), 1230-1237
- Y. Li, D, N. Crowther, M. J. W. Green, P. S. Mitchell and T. N. Baker : ISIJ Int, Vol. 41
- O. Grong : Metallurgical Modeling of Welding, The Institute of Materials
- Sysweld+ User Manual(Ver. 10), Framasoft+CSI. 1996
- J. B. Leblond and J. C : Devaux, Acta Metall., 32, 1984
- Rosenthal : D., 2eme Congress National des Science, Brussels, (1935), 1277
- R. R. Rykalin : Welding in the World, 1012(1974) 227 (10)
- P. S. Myers, O. A. Uyehara and G. L. Borman : Welding Research Council Bulletin (1967), 123
- V. Pavelic, R. Tanbakuchi. O. A. Uyehara and P. S. Myers : Welding Journal, 48(1969), 295
- S. Kou : Metall. Trans. A, 13A(1982), 363
- J. A. Goldak, A. Chakravarti and M. J. Bibby Trans. AIME, 15B(1984), 299
- J. F. Key, H. B. Smartt, J. W. Chan and M. E. Mcilwain : Proceedings Int. Conf. on 'Welding Technology for Energy Applications', Gatlingburg, TN, 1982
- A. Bejan : Heat Transfer, (1966), 211
- C. Wagner : Z. Electrochem., 65(1961), 581
- M. J. Whelan : Metal Sci. J., 3(1969), 95 https://doi.org/10.1179/msc.1969.3.1.95
- J. Agren : Scand. J. Metall., 19(1990), 2
- R. E. Reed Hill : 'Physical Metallurgy of Principles (3th Ed.).' Boston, PWS, 1996
- W. C. Leslie : 'Physical Metallurgy of Steels(4th ed.),' Elsevier Science, 1982
- B. B. Rath and H. hu : Trans. TMS AIME, 245(1969), 1243
- B. B. Rath and H. hu : Trans. TMS AIME, 245(1969), 1577
- P. A. Manohar, D. P. Dunne, T. Chandra and C. R. Killmore. : ISIJ Int, 36 (1996), 194 https://doi.org/10.2355/isijinternational.36.194
- C. A. Dube, H. I. Aaronson and R. F. Mehl: Rev. Met., 55(1958), 201 https://doi.org/10.1051/metal/195855030201
- 일본 철강협회 : 제 128회 서산 기념 기술 강좌, 접합 기술 최근 진보(1989)
- W. T. Reynolds, Jr., M. Enomoto and H. I. Aaronson : Phase Transformations in Ferrous alloys, TMS AIME, Warrendale PA, (1984), 155
- J. Barford and W. S. Owen: J. Iron Steel Inst., 197(1961), 146
- M. Umemoto, K. Horiuch and I. Tamura: Trans. ISIJ, 22(1982), 855
- L. W. Graham and H. J. Axon: J. Iron Steel Inst., 191(1959), 361
- A. D. Davenport: Trans. AIME, 145(1941), 301
- R. M. Dey: Trans. Ind. Inst. of Metals, 39(1986), 169
- A. Matsuzaki and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 15(1999), 519
- F. V. Goler and G. Sach: Zeit. F. Phys., 77(1932), 281 https://doi.org/10.1007/BF01348916
- W. A. Johnson and R. F. Mehl: Trans. AIME, 125(1939), 416
- M. Avrami: J. Chem. Phy., 7(1939), 1103 https://doi.org/10.1063/1.1750380
- J. W. Cahn: Acta Metall., 4(1956), 449 https://doi.org/10.1016/0001-6160(56)90041-4
- M. Umemoto: Control and Prediction of Structure and Property, ISIJ, Tokyo, Japan, (1988), 105
- K. Lorenz and C. Duren: Conf. on Steels for Pipe and Pipeline Fittings, London, Oct. 21-23(1981)
- K. Satoh and T. Terasaki: General Assembly of JWS, 25(1979), 98
- K. Lorenz and C. Duren: IIW Doc. IX-B-II-82, (1982)
- M. Beckert and R. Holz: Schweisstechnik, 23(1973), 344
- W. C. Leshie: The Physical Metallurgy of Steels, Mcgraw Hill, New York, (1982)
- N. Yurioka, M. Okumura, T. Kasuya and H. J. U. Cotton: Metal Const., 19(1987), 44. 217R
- P. Maynier, J. Dollet and B. Jungmann: Proc. Of AIME Symposium, Oct. 24 26, (1977), 518