Abstract
Shear strength parameters obtained from field tests are important factors in the analysis of slope stability. In this paper, sensitivity analysis was performed to evaluate the effect of input parameters on the analysis of slope stability. The input parameters selected for sensitivity analysis were slope angle, cohesion, and friction angle. Monte-Carlo Simulation method was to estimate input parameters for sensitivity analysis in slope stability, and the limit equilibrium method was used to calculate the factor of safety of slope stability. A rock slope, failed in the field, was used for the sensitivity analysis of input parameters in the analysis of slope stability. The result of analysis shows that the factor of safety of the rock slope was a little low. From partial correlation coefficient (PCC) of input parameters from the sensitivity analysis, slope stability was dependant mainly on cohesion and slope angle. The effect of friction angle was smaller than those of cohesion and slope angle on slope stability.
사면 안정해석은 현장 조사로부터 얻어지는 지반강도 정수의 역할이 매우 중요한 인자로 작용한다. 본 연구에서는 사면안정성 분석에서 입력변수들에 대한 상대적인 평가를 위하여 민감도 분석을 수행하였다. 설정된 입력 변수들은 사면의 경사, 점착력, 내부마찰각의 3가지 종류로 선별하였다. 사면안정해석은 기본적으로 한계평형으로 해석하였으며 수집된 현장자료를 이용하여 분석한 결과 확률변수들은 정규분포를 나타내는 것으로 나타났다. 몬테카를로 시뮬레이션을 이용하여 입력변수들을 발생시켰으며 붕괴된 암반사면을 이용하여 민감도 분석을 실시하였다. 분석결과 암반사면의 안전율은 예상보다 낮게 나타나는 것을 알 수 있었다. 민감도 분석 지수(PCC)를 이용하여 분석한 결과 사면 안전율에는, 점착력과 사면 경사가 매우 민감한 영향을 미치는 것으로 나타났으며 내부마찰각은 상대적으로 낮은 민감성을 띠는 것으로 분석되었다.