DOI QR코드

DOI QR Code

조향 가능한 전방향 바퀴를 갖는 전방향 이동로봇의 에너지 효율 개선

Improvement of Energy Efficiency for an Omnidirectional Mobile Robot with Steerable Omnidirectional Wheels

  • 발행 : 2005.08.01

초록

Since most autonomous mobile robots are powered by a battery, it is important to increase the continuous operating time without recharging. This can be achieved by improving the energy efficiency of a mobile robot, but little research on energy efficiency has been performed. This paper proposes two methods for improving the energy efficiency of an omnidirectional mobile robot.. One method is to realize a continuously variable transmission (CVT) by adopting the mechanism of steerable omnidirectional wheels. The other is the proposed steering algorithm in which wheel arrangement of the mobile robot is continuously adjusted so as to obtain the maximum energy efficiency of the motors during navigation. In addition, new omnidirectional wheels which can be transformed to the conventional wheels depending on the driving conditions are proposed to compensate for less efficient omnidirectional drive mode. Various tests show that motion control of the OMR-SOW works satisfactorily and the proposed steering algorithm for CVT can provide higher energy efficiency than the algorithm using a fixed steering angle. In addition, it is shown that the differential drive mode can give better energy efficiency than the omnidirectional drive mode.

키워드

참고문헌

  1. J. F. Blumrich, 'Omnidirectional vehicle,' United States Patent 3,789,947, 1974
  2. M. West, H. Asada, 'Design of ball wheel mechanisms for omnidirectional vehicles with full mobility and invariant kinematics,' Journal of Mechanical Design, vol. 119, pp.153-161, 1997 https://doi.org/10.1115/1.2826230
  3. P. Muir, C. Neuman, 'Kinematic modeling of wheeled mobile robots,' Journal of Robotic Systems, vol. 4, no. 2, pp.281-340, 1987 https://doi.org/10.1002/rob.4620040209
  4. H. Asama, M. Sato, N. Goto, A. Matsumoto, I. Endo, 'Mutual transportation of cooperative mobile robots using for klift mechanisms,' Proc. of Int. Conf. on Robotics and Automation, pp.1754-1759, 1996
  5. M. Wada, H. Asada, 'Design and control of a variable footprint mechanism for holonomic omnidirectional vehicles and its application to wheelchairs,' IEEE Trans. on Robotics and Automation, vol. 15, no. 6, pp.978-989, 1999 https://doi.org/10.1109/70.817663
  6. J.-B. Song, K.-S. Byun, 'Design and control of an omnidirectional mobile robot with steerable omnidirectional wheels,' Journal of Robotic Systems, Wiley Europe, vol. 21, no. 4, pp.193-208, April, 2004 https://doi.org/10.1002/rob.20009
  7. B. E. Ilou, 'Wheels for a course stable self-propelling vehicle movable in any desired direction on the ground or some other base,' United States Patent 3,876,255, 1975
  8. K.-S. Byun, J.-B. Song, 'Design and construction of continuous alternate wheels for an omni-directional mobile robot,' Journal of Robotic Systems, Wiley Europe, vol. 20, no. 9, pp.569-579, September, 2003 https://doi.org/10.1002/rob.10107