References
- 김수관, 전창길, 황갑운, 김병옥: Fin type 임플랜트 고정체의 유한요소법적 분석. 대한구강악안면외과학회지 2003;29:14-25
- 김영수, 조인호, 정성민, 임성빈: Esthetic Implant Dentistry: Soft and Hard Tissue Manamgement. 정원사 2001;48-67
- 김병옥, 홍국선, 김수관: IV형의 골질로 재생된 골내에 식립된 원통형 임플란트의 유한요소법적 연구. 대한구강악안면외과학회지 2004;30:331-338
- 김성호, 김수관, 심형순, 김병옥: 나사형 임플란트에 인접한 재생된 골과 자연골 사이의 경계부에 대한 유한요소법적 분석. 대한악안면성형재건회과학회지 2004;26:427-434
- 김수관, 박병기, 심형순, 김종관, 김병옥: 제4형 골질로 재생된 골에 식립한 나사형 임플란트에 대한 유한요소법적 분석. 대한악안면성형재건외과학회지 2004;26:542-550
- 지숙, 이상화, 김수관, 김병옥: 재생된 골과 자연골 사이의 계면에 대한 유한요소법적 분석. 대한악안면성형재건회과학회지 2004;26:24-33
- Bahat O: Osseointegrated implants in the maxillary tuberosity: Report in 45 consecutive patients. Int J Oral Maxillofac Implants 1992;7:459-467
- Balshi T: An analysis and management of fractured implants: A clinical report. Int J Ortal Maxillofac Implants 1996;11:372-378
- Clelland NL, Ismail YH, Zaki HS, Pipko D: Three-dimensional finite element stress analysis in and around the Screw-Vent Implant. Int J Oral Maxillofac Implants 1991;6:391-398
- Clift SE, Fisher J, Watson CJ: Finite element stress and strain analysis of the bone surrounding a dental implant: effect of variations in bone modulus. Proc Instn Mech Engrs 1992;206:233-241
- Davarpanah M, Martinez H, Kebir M, Etienne D, Tecucianu J: Wide- Diameter Implants: New Concepts. Int J Periodontics Restorative Dent 2001;21:149-159
- Duyck J, Naert IE, Van Oosterwyck H, Van der Sloten J, De Cooman M, Lievens S, et al: Biomechanics of oral implants: a review of the literature. Technol Health Care, 1997;5:253-273
- Eckert SE, Meraw SJ, Weaver AL, Lohse CM: Early experience with Wide-Platform MK II implants. Part I: Implant survival. Part II:Evaluation of risk factors involving implant survival. Int J Oral Maxillofac Implants 2001;16:208-216
- Fanuscu MI, Vu HV, Poncelet B: Implant biomechanics in grafted sinus: a finite element analysis. J Oral Implantol 2004;30:59-68 https://doi.org/10.1563/0.674.1
- Geramy A, Morgano SM: Finite element analysis of three designs of an implant-supported molar crown. J Prosthet Dent 2004;92:434-440 https://doi.org/10.1016/j.prosdent.2004.08.011
- Gregory M, Murphy W, Scot J, Watson CJ, Reeve PE: A clinical study of the Branemark dental implant system. Br Dent J 1990;168:18-23 https://doi.org/10.1038/sj.bdj.4807071
- Handelsman M: Treatment planning and surgical considerations for placement of wide-body implants. Compendium 1998;19:507-514
- Holmes DC, Loftus JT: Influence of bone quality on stress distribution for endosseous implants. J Oral Implantol 1997;23:104-111
- Jaffin RA, Berman CL: The excessive loss of Branemark fixtures in type IV bone. A 5-year analysis. J Periodontol 1991;62:2-4 https://doi.org/10.1902/jop.1991.62.1.2
- Langer B, Langer L, Herrmann I, Erug M: The wide fixture: A solution for special bone situations and rescue for the compromized implant. Part 1. Int J Oral Maxillofac Implants 1993;8:400-408
- Lazzara RJ: Criteria For Implant Selection: Surgical and prosthetic considerations. Prac Periodontics Aesthetic Dent 1994;6:55-62
- Meijer HJA, Kuiper JH, Starmans FJM, Bosman F: Stress distribution around dental implants: Influence of superstructure, length of implants, and height of mandible. J Prosthet Dent 1992;68:96-102 https://doi.org/10.1016/0022-3913(92)90293-J
- Meyer U, Vollmer D, Runte C, Bourauel C, Joos U: Bone loading pattern around implants in average and atrophic edentulous maxillae: a finite-element analysis. J Maxillofac Surg 2001;29:100-105
- Misch CE: Contemporary implant dentistry? 2nd ed. Mosby, St Louis, London, Philadelphia, Sydney, Toronto, 1999;109-118
- Oschenbein C: A primer for osseous surgery. Int Periodontics Restorative Dent 1986;6:9-47
- Rangert B, Krough P, Langer B: Bending overload and implant fracture: A retrospective clinical analysis. Int J Ortal Maxillofac Implants 1995;10:326-334
- Reiger MR, Adams WK, Kinzel GL: A finite element survey of eleven endosseous implants. J Prosthet Dent 1990;63:457-465 https://doi.org/10.1016/0022-3913(90)90238-8
- Sato Y, Shindoi N, Hosokawa R, Tsuga K, Akagawa Y:Biomechanical effects of double or wide implants for single molar replacement in the posterior mandibular region. J Oral Rehabili 2002;27:842-845
- Tada S, Stegaroiu R, Kitamura E, Miyakawa O, Kusakari H:Influence of implant design and bone quality on stress/strain distribution in bone around implants: a 3-dimensional finite element analysis. Int J Oral Maxillofac Implants 2003;18:357-368
- Wang TM, Leu LJ, Wang HS, Li LD: Effects of prosthesis materials and prosthesis splinting on peri-implant bone stress around implants in poor-quality bone: A Numeric Analysis. Int J Oral Maxillofac Implants 2002;17:231-237