광중합형 레진으로 아말감 면에 브라켓 접착 시 전단결합강도

Shear bond strength of orthodontic adhesive to amalgam surface using light-cured resin

  • 조지영 (고려대학교 임상치의학대학원) ;
  • 이동렬 (고려대학교 임상치의학대학원) ;
  • 임용규 (고려대학교 임상치의학대학원)
  • Cho, Ji-Young (Department of Orthodontics, Graduate School of Clinical Dentistry, Korea University) ;
  • Lee, Dong-Yul (Department of Orthodontics, Graduate School of Clinical Dentistry, Korea University) ;
  • Lim, Yong-Kyu (Department of Orthodontics, Graduate School of Clinical Dentistry, Korea University)
  • 발행 : 2005.12.31

초록

본 연구는 아말감 면에 광중합형 레진으로 교정용 브라켓을 접착시킬 경우, 광원의 차이(할로겐 광중합기와 light-emitting diode (LED) 광중합기)와 샌드블라스팅 표면처리 여부에 따른 접착제의 전단결합강도를 비교하고자 시행되었다. 발거된 소구치 30개를 대조군으로 이용하였으며 법랑질 표면을 산부식한 후 통상적인 방법으로 브라켓을 접착하였다. 60개의 다른 소구치에 아말감 충전을 하여 실험군으로 이용하였다. 두 군에서 할로겐 광중합기와 LED 광중합기를 이용하여 브라켓을 접착시키고 브라켓이 탈락될 때까지 힘을 가해 전단결합강도를 측정하였다. 실험 결과, 실험군의 전단결합강도는 약 3-5.5 MPa로 대조군(19MPa)보다 낮았다. 실험군에서 샌드블라스팅 표면처리를 한 경우, 할로겐 광중합기를 사용한 군이 LED 광중합기를 사용한 군보다 높은 전단결합강도를 보였으나 (P<0.05), 샌드블라스팅 표면처리를 하지 않은 경우에는 광원에 따라 전단결합강도에 차이를 보이지 않았다 (p > 0.05). 할로겐 광중합 군과 LED 광중합 군 모두에서 샌드블라스팅 여부에 따른 전단결합강도에 통계적으로 유의한 차이가 없었다 (p>005). 아말감 면에 광중합형 레진을 이용하여 브라켓을 접착할 경우 할로겐 광중합기와 LED 광중합기로 얻을 수 있는 접착제의 결합강도는 임상적으로 사용하기에는 낮게 나타나, 이의 증진 방법을 도모하기 위해 앞으로 더 많은 연구가 필요하리라 사료된다.

This study was performed to compare the shear bond strength of orthodontic adhesive to amalgam according to different light sources (halogen-based light and light emitting diode (LED)) and amalgam surface treatments. Ninety extracted human premolars were randomly divided into 6 groups (4 experimental and 2 control groups) of 15 by light sources and surface treatments. Orthodontic brackets were bonded and shear bond strength was measured with an Instron universal testing machine. The findings were as follows: The bond strength of adhesive to amalgam surface was 3-5.5 MPa which was lower than that of acid-etched enamel (19 MPa) control. In the sandblasted amalgam surface, the shear bond strength of the halogen light group was higher than that of the LED group (p < 0.05) but. in the non-treated amalgam surface. there was no significant difference in the shear bond strength according to the light sources (p> 0.05). Within the same light source. sandblasting had no significant effect on the shear bond strength of the adhesive bonded to amalgam surface (p > 0.05). There was no significant difference in shear bond strength according to the light sources in acid-etched enamel control groups. This results suggest that there can be a limit in using light curing adhesives when brackets are bonded to an amalgam surface. Additional clinical studies are necessary before routine use of halogen light and LED light curing units can be recommended in bonding brackets to an amalgam surface.

키워드

참고문헌

  1. Newman GV. Epoxy adhesives for orthodontic attachments: progress report. Am J Orthod 1965:51:901-12 https://doi.org/10.1016/0002-9416(65)90203-4
  2. 임동혁, 김태우, 남동석, 장영일. 서울대학교 치과병원 교정과에 내원한 부정교합 환자의 최근 경향. 대치교정지 2003;33:63-72
  3. Andreasen GF, Stieg MA. Bonding and debonding brackets to porcelain and gold. Am J Orthod Dentofacial Orthop 1988;93:341-5 https://doi.org/10.1016/0889-5406(88)90164-3
  4. Buyukyilmaz T, Zachrisson YO, Zachrisson BU. Improving orthodontic bonding to gold alloy. Am J Orthod Dentofacial Orthop 1995;108:510-8 https://doi.org/10.1016/S0889-5406(95)70051-X
  5. Zachrisson BU, Buyukyilmaz T. Recent advances in bonding to gold, amalgam, and porcelain. J Clin Orthod 1993:23:661-75
  6. Sperber RL, Watson PA, Rossouw PE, Sectakof PA. Adhesion of orthodontic attachments to dentai amalgam: in vitro study. Am J Orthod Dentofacial Orthop 1999;116:506-13 https://doi.org/10.1016/S0889-5406(99)70180-0
  7. Zachrisson BU, Buyukyilmaz T, Zachrisson YO. Improving orthodontic bonding to silver amalgam. Angle Orthod 1995;65:35-42
  8. Gross MW, Foley TF, Mamandras AH. Direct bonding to Adlloy-treated amalgam. Am J Orthod Dentofacial Orthop 1997;112:252-8 https://doi.org/10.1016/S0889-5406(97)70252-X
  9. Oesterle LJ, Messersmith ML, Devine SM, Ness CF. Light and setting times of visible light-cured orthodontic adhesive. J Clin Orthod 1995;29:31-6
  10. Blankenau RJ, Kelsey WP, Powell GL, Shearer GO, Barkmeier WW, Cavel WT. Degree of composite resin polymerization with visible light and argon laser. Am J Dent 1991;4:40-2
  11. Evans LJ, Peters C, Flickinger C, Taloumis L, Dunn W. A comparison of shear bond strength of orthodontic brackets using various light sources, light guides, and cure times. Am J Orthod Dentofacial Orthop 2002;121:510-5 https://doi.org/10.1067/mod.2002.121558
  12. Sfondrini MF, Cacciafesta V, Pistorio A, Sfondrini G. Effects of conventional and high intensity light curing on enamel shear bond strength of composite resin and resin-modified glass-ionomer. Am J Orthod Dentofacial Orthop 2001;119:30-5 https://doi.org/10.1067/mod.2001.111399
  13. 박영철, 유형석, 오영근, 이승연. Plasma arc light를 이용한 bracket 부착시의 전단 결합 강도와 파절 양상의 유형. 대치교정지 2001;31 :261-70
  14. Klocke A, Korbmacher HM, Huck LG, Kahl-Nieke B. Plasma arc curing lights for orthodontic bonding. Am J Orthod Dentofacial Orthop 2002;122:643-8 https://doi.org/10.1067/mod.2002.126897
  15. Mills RW, Jandt KD, Ashworth SH. Dental composite depth of cure with halogen and blue light emitting diode technology. Br Dent J 1999;186:388-91
  16. Haitz RH, Craford MG, Wiessman RH. Handbook of optics; vol 2. New York: McGraw Hill; 1995. p. 121-9
  17. Dunn WJ, Taloumis LJ. Polymerization of orthodontic resin cement with light-emitting diode curing units. Am J Orthod Dentofacial Orthop 2002;122:236-41 https://doi.org/10.1067/mod.2002.123949
  18. Bishara SE, Ajlouni R, Oonsombat C. Evaluation of a new curing light on the shear bond strength of orthodontic brackets. Angle Orthod 2003;73:431-5
  19. 신재호, 이동렬. 브라켓 접착 시 광중합방식에 따른 전단결합강도와 파절양상. 2003 고려대학교 임상치의학대학원 논문집
  20. Newman GV, Newman RA, Sun BI, Ha JL, Ozsoylu SA. Adhesion promoters, their effects on the bond strength on metal brackets. Am J Orthod Dentofacial Orthop 1995;108:237-41 https://doi.org/10.1016/S0889-5406(95)70015-3
  21. Yamashita A. Procedures for applying adhesive resin (MMA-TBB) to crown and bridge restorations. Part I. The influence of dental non-precious alloy and the treatment of inner surface of metal to adhesion. J Jpn Prosthet Dent 1982;26:584-91
  22. Reynolds JR. A review of direct orthodontic bonding. Br J Orthod 1975;2:171-8 https://doi.org/10.1080/0301228X.1975.11743666
  23. Knoll M, Gwinnett A, Wolff M. Shear strength of brackets bonded to anterior and posterior teeth. Am J Orthod 1986;89:476-9 https://doi.org/10.1016/0002-9416(86)90003-5
  24. 김현희, 차경석, 이진우. 아말감 충전물의 크기와 표면 처리 방법에 따른 교정용 브라켓의 전단접착강도에 대한 연구. 대치교정지 2001;31:381-91
  25. Caughman WF, Kovarik RE, Rueggeberg FA, Snipes WB. The bond strength of panavia EX to air-abraded amalgam. Int J Prothodont 1991 ;4:276-81
  26. Buyukyilmaz T, Zachrisson BU. Improving orthodontic bonding to siver amalgam. Part 2. Lathe-cut, admixed, and spherical amalgam with different intermediate resins. Angle Orthod 1998;68:337-44
  27. Yoshida K, Atsuta M. Effects of adhesive primers for noble metals on shear bond strength of resin cements. J Dent 1997;25:53-8 https://doi.org/10.1016/0300-5712(95)00123-9
  28. Matsumura H, Yanagida H, Tanoue N, Atsuta M, Shimoe S. Shear bond strength of resin composite veneering material to gold alloy with varying metal surface preparations. J Prosthet Dent 2001;86:315-9 https://doi.org/10.1067/mpr.2001.114823