참고문헌
- Timae, Y.A., 'Memoir about Metal Planning,' (in Russian) Saint Petersburg, 1877
- Zvorykin, K.A., 'On the Force and Energy Necessary to Separate the Chip from the Workpiece,' (in Russian) Vestnic Promyslennostie, p.123, 1896
- Merchant, M.E., 'Mechanics of Metal Cutting Process,' J. Appl. Phys., Vol.16, pp.267-324, 1945 https://doi.org/10.1063/1.1707586
- Shaw, M.C., Cook, N.H. and Finnie, I., 'Shear Angle Relationships in Metal Cutting,' ASME Trans., Vol. 75, pp. 273-288, 1953
- Oxley, P.L.B., 'The Mechanics of Machining,' Ellis Horwood, Chicester, 1989
- Piispanen, V., 'Theory of Formation of Metal Chips,' J. Appl. Phys., Vol. 19, pp. 876-881, 1948 https://doi.org/10.1063/1.1697893
- Kobayashi, S. and Thomsen, E.G., 'Metal Cutting Analysis - I. Reevaluation and New Method of Presentation of Theories,' ASME J. Eng Ind., Vol. 84, pp. 63-70, 1962 https://doi.org/10.1115/1.3667440
- Wright, P. K., 'Predicting the Shear Plane Angle in Machining from Work Material Strain-Hardening Characteristics,' ASME J. Eng. Ind., Vol. 104, pp. 285-292, 1982 https://doi.org/10.1115/1.3185832
- Bricks, A.A., 'Metal Cutting,' (in Russian) Saint-Petersburg, 1896
- Zorev, N.N., 'Metal Cutting Mechanics,' Pergamon Press, Oxford, 1966
- Palmer, W.B. and Oxley, P.L.B., 'Mechanics of Orthogonal Machining,' Proc. Inst. Mech. Eng., Vol. 173, pp. 623-654, 1959 https://doi.org/10.1243/PIME_PROC_1959_173_053_02
- Lee, E.H. and Shaffer, B.W., 'The Theory of Plasticity Applied to a Problem of Machining,' ASME J. Appl. Mech., Vol. 18, pp. 405-412, 1951
- Klushin, M.Y., 'Metal Cutting,' (in Russian) Mashgiz, Moscow, 1958
- Kudo, H., 'Some New Slip-Line Solutions for Two-Dimensional Steady-State Machining,' Int. J. Mech. Sci., Vol.7, pp.43-55, 1965 https://doi.org/10.1016/0020-7403(65)90084-6
- Toropov, A. and Ko, S.L., 'A New Slip-Line Theory for Orthogonal Cutting and Its Application,' Proc. of the 3rd Intern. Asia Pacific Forum on Precision surface finishing and deburring technology, 26-28, pp.200-213, Mar., 2003
- Poletika, M.F., 'Contact Loads on Tool Faces,' (in Russian) Machinostroenie, Moscow, 1969
- Loladze, T.N., 'Chip Formation in Metal Cutting,' (in Russian) Mashgiz, Moscow, 1952
- Hastings, W.F., Mathew, P., Oxley, P.L.B., 'A Machining Theory for Predicting Chip Geometry, Cutting Forces, ets. from Work Material Properties and Cutting Conditions,' Proc. Roy. Soc. (London), Vol. A371, pp.569-587, 1980 https://doi.org/10.1098/rspa.1980.0097
- Rozenberg, A.M., Rozenberg, O.A., 'Mechanics of Plastic Deformation in Cutting and Broaching,' (in Russian) Naukova Dumka, Kiev, 1990
- Kachanov, L.M., 'Fundamentals of the Theory of Plasticity,' (in Russian) Science, Moscow, 1969
- Cha I. N., Kim Y. J., 'A study on Cutting Model for the Plastic Deformation on Turning Operation,' Journal of the Korean Society of Precision Engineering, Vol.5, No.1, pp.29-39, 1988
- Vinogradov, A.A., 'Physical Fundamentals of Drilling of Intractable Materials by Carbide Drills,' (in Russian) Naukova Dumka, Kiev, 1985
- Bagchi, A. and Wright, P.K., 'Stress Analysis in Machining with the Use of Sapphire Tools,' Proc. Royal Society of London, A 409, pp.99-113, 1987 https://doi.org/10.1098/rspa.1987.0008
- Gordon, M.B., 'A Study of Friction and Lubrication in Metal Cutting,' (in Russian) Cheboksary State University Press, Cheboksary, 1972
- Petruha, G.G., 'Cutting of Difficult-to-Cut Materials,' (in Russian) Machinostroenie, Moscow, 1972
- Kato, S., Yamaguchi, K., Yamada, M., 'Stress Distribution at the Interface between Tool and Chip in Machining,' Trans. ASME, Journal of Engineering for Industry, Vol.94, pp.683-689, 1972 https://doi.org/10.1115/1.3428229