Performance Analysis of a Mixed-Flow Pump for Waterjet Propulsion

  • Ahn Jong-Woo (Korea Research Institute of Skips & Ocean Engineering, KORDI) ;
  • Kim Ki-Sup (Korea Research Institute of Skips & Ocean Engineering, KORDI) ;
  • Park Young-Ha (Korea Research Institute of Skips & Ocean Engineering, KORDI) ;
  • Kim Kyung-Youl (Korea Research Institute of Skips & Ocean Engineering, KORDI) ;
  • Oh Hyoung-Woo (Department of Mechanical Engineering, Chungju National University)
  • 발행 : 2005.06.01

초록

A mixed-flow pump is largely applied for waterjet propulsion in high-speed vessels because of excellent cavitation performance. For the present study, we analyze the performance of mixed-flow pump, which is composed of impeller and stator. The test device for a mixed-flow pump was installed in the test section in the KRISO cavitation tunnel. The performance tests of two mixed-flow pumps were carried out with the test device at various flow rates using various nozzles. The test results agree fairly well with the predicted results by commercial CFD code. The test device is available for verification of impeller performance together with CFD analysis

키워드

참고문헌

  1. Balje O. E. 1981. Turbomachines : A Guide to Design, Selection and Theory. John Wiley
  2. CFX-BladeGen & CFX-BladegenPlus, Version 4.1. 2003. AEA Technology Engineering Software Inc. El Dorado Hills
  3. John Allison. 1993. Marine waterjet propulsion, SNAME Transactions, 101, 275-335
  4. Kimball R.W., T.E. Taylor and J.O. Scherer. 2001. Enhancements to the design and analysis of waterjet propulsors using a coupled lifting-surface/rans technique including comparisons with experiment. Int'l Conf. of Water jet Propulsion III, 2
  5. Koushan K. 1998. A preliminary design and off-design prediction method for waterjet propulsion systems. Int'l Conf. on Waterjet Propulsion-Latest Developments, 10
  6. Oh H.W. and K.Y. Kim. 2001. Conceptual design optimization of a mixed-flow pump impellers using mean streamline analysis. Proc. Instn Mech. Engrs, Part A : J. Power and Energy, 215(A1), 133-138 https://doi.org/10.1243/0957650011536499
  7. Oh H.W., E.S. Yoon, K.S. Kim and J.W. Ahn. 2003. A practical approach to the hydraulic design and performance analysis of a mixed-flow pump for marine waterjet propulsion. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, 217, 659-664 https://doi.org/10.1177/095765090321700610
  8. Park Y. H., K.S. Kim and J.W. Ahn. 2002. Experimental performance analysis of the mixed-type waterjet pump in cavitation tunnel. The 2nd PNU Int'l Colloquium, 12