고속 스핀들 전동기 구동을 위한 자기식 엔코더 구성에 관한 연구

The Study on the Composition of the Encoder for Driving the High Speed Spindle Motor

  • 최철 (OTIS-LG 서보 R&D팀) ;
  • 김철우 (부산대학교 전자전기통신공학부) ;
  • 이상훈 (OTIS-LG 엘리베이터 모터설계팀)
  • 발행 : 2005.05.01

초록

Magnetic encoder with relatively low pulse per rotation is generally used for detecting speed of the high-speed rotating machine. It is due to the fact of the mechanical problems of vibration and bearing stiffness and also the limit of maximum output pulse of the mounted encoder. The magnetic encoder is divided into two types, that is, toothed gear-wheel method and magnetic wheel method according to the shape of the rotation disk. In case of detecting speed by the tooth gear-wheel, the encoder itself can be acted as the additional inertia where the number of tooth determining the output pulse and the width of the wheel detecting the change of the magnetic flux density are relatively enough large considering the volume of the rotating machine. While the magnetic wheel method has the limit of the magnetizing number of the ring magnet, there is relatively few, if nv, the influence of inertia on the machine. In this paper, it is proposed a simple magnetic wheel encoder suited for the high speed rotating machine and the method of signal processing and the output characteristics are examined through the V/F operation of max 48,000(rpm) and 2.4(KW) spindle motor.

키워드

참고문헌

  1. Bon-He Bae, Seung-Ki Sul, Jeong-Hveck Kwon and Ji-Seob Byeon, 'Implementation of Sensorless Vector Control for Super-High-Speed PMSM of Turbo Compressor', IEEE Trans. on Industrial Application, vol. 39, no. 3, pp. 811-818, 2003 https://doi.org/10.1109/TIA.2003.810658
  2. K.Miyashita et al. 'Integrated magnetic rotary encoders.' in Conf. Rec. IECON '84, pp. 619-624
  3. Tsuneo Kume, Toshihiro Sawa, Toshitaka Yoshida and Mitsuno Sakamoto, 'A high-speed vector controlled spindle motor drive with closed Transition between with encoder control and without encoder control', IEEE Trans. on Industrial Application, vol. 28, no. 2, pp. 421-426, 1992 https://doi.org/10.1109/28.126751
  4. Michael T. DiRenzo, 'Switched Reluctance Motor Control-Basic Operation and Example Using the TMS320F240', TI Application Report, SPRA420A, February 2000
  5. 설승기 저, '전기기기제어론' chapter2, pp.84-96
  6. http://www.heidenhein.com/products
  7. http://www.allegromicro.com/sf/3185
  8. http://www.allegromicro.com/techpub2/an/an27701.pdf