DOI QR코드

DOI QR Code

A Study on Performance Simulation of an Reciprocating Engine for Small Long Endurance Unmanned Aerial Vehicles

소형 장기체공 무인기용 왕복엔진 성능 예측 시뮬레이션 연구

  • 장성호 (한국항공우주연구원 스마트무인기기술개발사업단) ;
  • 구삼옥 (한국항공우주연구원 스마트무인기기술개발사업단) ;
  • 신영기 (세종대학교 기계공학과)
  • Published : 2005.07.01

Abstract

Development of an engine with good fuel economy is very important for successful implementation of long endurance miniature UAVs (unmanned aerial vehicles). In the study, a 4-stroke glow-plug engine was modified to a gasoline-fueled spark-ignition engine. Engine tests measuring performance and friction losses were conducted to tune a simulation program for performance prediction. It has been found that excessive friction losses are caused by insufficient lubrication at high speeds. The simulation program predicts that engine power and fuel economy get worse with high altitude due to increasing portion of friction losses. The simulation results suggest quantitative guidelines for further development of a practical engine.

Keywords

References

  1. McGeer, T. and Vagners, J., 1999, 'Wide-Scale Use of Long-Range Miniature Aerosondes over the World's Oceans,' Proc. AUVSI 26th annual symposium, Association for Unmanned Vehicle Systems International, Baltimore
  2. Koo, S. O., Chang, S. H., Oh, J. S. and Yeom, C. H., 2001, 'A Study on the Modification of an Small-Scale Glow Engine for Unmanned Aerial Vehicles,' Proceedings of the KSAS Spring Annual Meeting 2001
  3. Kim, Y. J., Jeon, C. S. and Lim, K. H., 1999, 'Development of a Model Aircraft Engine,' Journal of Institute of Aerospace Industry Technology, Hankuk Aviation University, Vol. 9, pp. 205-213
  4. http://www.insitugroup.com, 2005
  5. Poulos, S. G., 1982, 'The Effect of Chamber Geometry on S. I. Engine Combustion Rates - A Modeling Study,' Master Thesis, Dept. of Mechanical Engineering, M.I.T.
  6. Heywood, J. B., 1988, 'Internal Combution Engine Fundamentals,' McGraw-Hill Book, pp. 389-390
  7. Labreuche, G., 2001, 'Total Friction Effective Pressure and Torque Estimator,' The International Workshop MECA01, U. of Salerno
  8. Heywood, J. B., 1988, 'Internal Combution Engine Fundamentals,' McGraw-Hill, pp. 50-51
  9. http://www.aerosonde.com/, 2005