Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

The Effect of Injection Velocity on Liquid Segregation of Grain Controlled Rheological Material Considering Asymmetry Multi Thickness Variation

비대칭 다단 두께 변화를 고려한 결정입 제어 반용융 알루미늄 소재의 캐스팅에서 사출속도가 액상편석에 미치는 영향

  • 서판기 (부산대학교 정밀기계공학과) ;
  • 정용식 (부산대학교 정밀기계공학과) ;
  • 강충길 (부산대학교 기계공학부)
  • Published : 2005.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, in the field of automobile industry, to solve the problem of reducing the weight of automobile for the improvement of fuel efficiency and the protection of environment, the aluminum alloy parts have been substituted for the steel parts. However, the aluminum alloy does not have as good mechanical property as the steel part. To improve the mechanical property, the semi-solid die casting process is performed to make automobile parts. In the fabrication of semisolid material the control of the liquid segregation is very important to improve the material properties of aluminum alloy. In the present paper we examine the influence of the liquid segregation by the injection conditions in the semi-solid die casting has been investigated.

Keywords

References

  1. G. Chirmetta, L. Zanardi, 1996, Production of Structural Components by Thixofonning Aluminum Alloys, Proc. Of the 4th Int. Conf. On Semi-solid Processing of Alloys and composites, Sheffield, D. H. Kirkwood, P. Kapranos, Eds., Univ. of Sheffield, UK, pp. 235-244
  2. K. P. Young, 1996, Semi-Solid Metal Forming Alloys and Composites, Nature and Properties of Semi-Solid Materials proc. Of a Symposium by the TMS Solidification Committes of the Material Design anf Manufacture Division, pp. 245-266
  3. M. C. Flemings, 1991, Behavoir of Metal Alloys in the Semi-Solid State, Metallurgical Transactions, 27 A, pp. 957-981
  4. G. Chiarmetta, 1996, Thixoforming of Automobile Components, Proceedings of the 4th Int. Conference on Semi-Solid Processing of Alloys and Composites. pp. 204-207
  5. C. Y. Chen, J. A. Sekhar, D. G Backman, Mehrabian, 1979, Thixoforging of Aluminum Alloy, Materials Science and Engineering, 40, pp. 265 -272 https://doi.org/10.1016/0025-5416(79)90198-8
  6. M. Kiuchi, S. Sugiyama, 1992, A new Process to Manufacture Semi-Solid Metals, 2nd Int'l Conf., on the Processing of Semi-Solid Alloys and Composites MIT, pp. 47-56
  7. D. A. Pinsky, P. O. Charreyron, 1993, Alternate Reduce Weight in Automotives, Advanced Materials and Process, Vol. 6, pp. 146-147
  8. C. G. Kang, K. D. Jung, 2001, Improvement of the Liquid Segregation Phenomena of Semisolid Aluminum Alloys by the Multistage Strain Rate Control in the Compression Test, Journal of Materials and Performance, Vol. 10(0), pp. 1-10
  9. P. K. Seo, S. W. Youn, C. G. Kang, 2002, The Effect of test Specimen Size and Strain-rate on Liquid Segregation in Deformation Behavior of Mushy State Material, Journal of Materials Processing Technology, Vol. 130-131, pp. 551-557 https://doi.org/10.1016/S0924-0136(02)00762-8
  10. Bernd Meurer, Dirk Haferkamp, Alexander Jorg, 2001, Use of simulation in the production of cast aluminium wheels, MAGMAsoft Technical Report
  11. Jorg C. Sturm, Preben N. Hansen Gotz Hartmann, Achim Egner-Walter, 2002, Optimized Development for casting and casting process, MAGMAsoft Technical Report